A new method to enhance the biofunctionalization of Ti materials was developed by the immersion of Au-sputtered titanium plates into a solution of alkanethiol with a carboxy group end (HS-C11-COOH). X-ray photoelectron spectroscopy (XPS) analysis showed that the gold content increased with the Au sputtering time and reached over 98 at% after 100 s. The content of the characteristic alkanethiol elements (S, C, and O) in the immersed Ti specimens increased with the Au sputtering time, which indicates that the binding of alkanethiol molecules is enhanced by the Au modification on the Ti surface. Qualitative analysis of XPS (Au-S, COO(-), and OH(-) species) and FTIR spectra (peaks assignable to an aliphatic carboxylic acid) for the sample after immersion also supported this. A strong positive correlation between the S and Au content confirms that Au sputtering is an effective method to control the alkanethiol treatment of Ti substrates.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.4012/dmj.2013-182 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
In Situ Synthesis of Ternary Ni-Fe-Mo Nanosheet Arrays for OER in Water Electrolysis.
Molecules
January 2025
School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471003, China.
Water electrolysis is a promising path to the industrialization development of hydrogen energy. The exploitation of high-efficiency and inexpensive catalysts become important to the mass use of water decomposition. Ni-based nanomaterials have exhibited great potential for the catalysis of water splitting, which have attracted the attention of researchers around the world.
View Article and Find Full Text PDFSize Dependence of the Band Gap of Core-Shell Tantalum and Tantalum Oxide (V) Nanoclusters.
Nanomaterials (Basel)
December 2024
Department No. 78 Physical and Technical Problems of Metrology, National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), 115409 Moscow, Russia.
Monodisperse films of spherical tantalum oxide (V) nanoclusters and spherical tantalum nanoclusters with a tantalum oxide shell with diameters of 1.4-8 nm were obtained by magnetron sputtering. The size of the deposited nanoclusters was controlled using a quadrupole mass filter.
View Article and Find Full Text PDFBalancing Activity and Stability through Compositional Engineering of Ternary PtNi-Au Alloy ORR Catalysts.
ACS Catal
January 2025
Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University, V Holešovičkách 2, 180 00 Prague 8, Czech Republic.
Achieving the optimal balance between cost-efficiency and stability of oxygen reduction reaction (ORR) catalysts is currently among the key research focuses aiming at reaching a broader implementation of proton-exchange membrane fuel cells (PEMFCs). To address this challenge, we combine two well-established strategies to enhance both activity and stability of platinum-based ORR catalysts. Specifically, we prepare ternary PtNi-Au alloys, where each alloying element plays a distinct role: Ni reduces costs and boosts ORR activity, while Au enhances stability.
View Article and Find Full Text PDFDNA Origami Adsorption and Lattice Formation on Different SiO Surfaces.
Chemistry
January 2025
Technical and Macromolecular Chemistry, Paderborn University, Warburger Str. 100, 33098, Paderborn, Germany.
Self-assembled DNA origami lattices on silicon oxide surfaces have great potential to serve as masks in molecular lithography. However, silicon oxide surfaces come in many different forms and the type and history of the silicon oxide has a large effect on its physicochemical surface properties. Therefore, we here investigate DNA origami lattice formation on differently fabricated SiO films on silicon wafers after wet-chemical oxidation by RCA1.
View Article and Find Full Text PDFFine Control of Optical Properties of NbO Film by Thermal Treatment.
Micromachines (Basel)
November 2024
Shenyang Academy of Instrumentation Science, Shenyang 110043, China.
Thermal treatment is a common method to improve the properties of optical thin films, but improper thermal treatment processing will result in the degradation of the optical properties of the optical thin film. The thermal stability of niobium oxide (NbO) thin films prepared by magnetron sputtering was systematically studied by analyzing the roughness and morphology of the film under different thermal treatment processes. The results show that the amorphous stability of the NbO thin film can be maintained up to 400 °C.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!