Plasmacatalytic removal of lead acetate assisted by precipitation.

Chemosphere

Laboratoire des Sciences et Techniques de l'Environnement et de la Valorisation, Faculté des Sciences et de la technologie, Université de Mostaganem, Algeria.

Published: July 2014

The Gliding Arc Discharge (GAD) is an efficient non-thermal plasma technique able to degrade organic compounds dispersed in water at atmospheric pressure. The degradation of the organometallic lead acetate (PbAc) in aqueous solution was performed by two distinct plasmageneous processes: GAD and GAD/TiO2. The global oxidation of the organic matter was followed by Chemical Oxygen Demand (COD) and the mineralization was determined by the Total Organic Carbon (TOC). The Pb(2+) ions released during the degradation process were measured by Atomic Absorption Spectroscopy (AAS). For 2h of GAD treatment, the degradation rate of PbAc (10mM) reached 83% and for the same duration of GAD/TiO2 process ([TiO2]=1gL(-1)), it reached 93%. The release of Pb(2+) ions in the solution was respectively of 95% and 57% for GAD and GAD/TiO2 processes. The released Pb(2+) ions were removed by precipitation process in a basic medium at pH=11.1. A reaction mechanism was proposed to explain the PbAc molecule degradation and the Pb(2+) elimination.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2013.12.071DOI Listing

Publication Analysis

Top Keywords

pb2+ ions
12
lead acetate
8
gad gad/tio2
8
plasmacatalytic removal
4
removal lead
4
acetate assisted
4
assisted precipitation
4
precipitation gliding
4
gliding arc
4
arc discharge
4

Similar Publications

The removal of heavy metal ions, such as lead (Pb2+), from aqueous systems is critical due to their high toxicity and bioaccumulation in living organisms. This study presents a straightforward approach for the synthesis and surface modification of iron oxide nanoparticles (IONPs) for the magnetic removal of Pb2+ ions. IONPs were produced via electrosynthesis at varying voltages (10-40 V), with optimal magnetic properties achieved at 40 V resulting in highly crystalline and magnetic IONPs in the gamma-maghemite (γ-Fe2O3) phase.

View Article and Find Full Text PDF

An increasing amount of water pollution is being caused by an increase in industrial activity. Recently, a wide range of methods, including extraction, chemical coagulation, membrane separation, chemical precipitation, adsorption, and ion exchange, have been used to remove heavy metals from aqueous solutions. The adsorption technique is believed to be the most highly effective method for eliminating heavy metals from wastewater among all of them.

View Article and Find Full Text PDF

Ferrihydrite (Fh), a widely distributed mineral in the environment, plays a crucial role in the geochemical cycling of elements. This study used experimental and computational approaches to investigate the adsorption behavior of seven heavy metal ions on Fh. The pH edge analysis revealed that the adsorption capacity followed the order: Pb > Cu > Zn > Cd > Ni > Co > Mn, with Pb showed the highest adsorption.

View Article and Find Full Text PDF

In this study, an optical sensor, JA/(2,6-di((E)-benzylidene)cyclohexan-1-one), was synthesized and characterized using H NMR and FT-IR spectroscopy. The sensor exhibited high efficiency and selectivity in detecting Pb ions, even in the presence of potential interfering ions such as Mn, Cu, Co, Cr, Ni, Ce, Hg, and Cd in aqueous solutions. The interaction of JA with Pb resulted in a significant enhancement of fluorescence intensity, suggesting the formation of a stable complex.

View Article and Find Full Text PDF

Limestone mining waste and its derived CaO were checked as an adsorbents of pb, Cu, and Cd ions from water solution. The characterization of Limestone and calcined limestone was studied by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), Scanning Electron Microscope (SEM), and Surface area measurements (BET). The optimum conditions of sorbent dosage, pH, initial concentration, and contact time factors were investigated for pristine limestone and calcined limestone absorbents.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!