Highly stretchable carbon nanotube transistors with ion gel gate dielectrics.

Nano Lett

Department of Materials Science and Engineering and ‡Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, Wisconsin 53706, United States.

Published: February 2014

Field-effect transistors (FETs) that are stretchable up to 50% without appreciable degradation in performance are demonstrated. The FETs are based on buckled thin films of polyfluorene-wrapped semiconducting single-walled carbon nanotubes (CNTs) as the channel, a flexible ion gel as the dielectric, and buckled metal films as electrodes. The buckling of the CNT film enables the high degree of stretchability while the flexible nature of the ion gel allows it to maintain a high quality interface with the CNTs during stretching. An excellent on/off ratio of >10(4), a field-effect mobility of 10 cm(2) · V(-1) · s(-1), and a low operating voltage of <2 V are achieved over repeated mechanical cycling, with further strain accommodation possible. Deformable FETs are expected to facilitate new technologies like stretchable displays, conformal devices, and electronic skins.

Download full-text PDF

Source
http://dx.doi.org/10.1021/nl403941aDOI Listing

Publication Analysis

Top Keywords

ion gel
12
highly stretchable
4
stretchable carbon
4
carbon nanotube
4
nanotube transistors
4
transistors ion
4
gel gate
4
gate dielectrics
4
dielectrics field-effect
4
field-effect transistors
4

Similar Publications

Research into flexible solid-state supercapacitors for wearable electronics focuses on achieving high performance and safety. Gel polymer electrolytes (GPEs) are preferred over fully solid-state electrolytes due to their better ionic conductivity while addressing safety concerns associated with liquid electrolytes. This study aims to enhance high-performance gel polymer electrolytes (HP-GPEs) by improving the ion transfer rate of polyvinyl alcohol (PVA) with sulfonated hexagonal boron nitride (known as white-graphene) and exploring how rheology influences ion-conduction within HP-GPEs.

View Article and Find Full Text PDF

Polymer gels have been widely used in flexible electronics, soft machines and impact protection materials. Conventional gels usually suffer from the inherent conflict between stiffness and toughness, severely hampering their applications. This work proposes a facile yet versatile strategy to break through this trade-off via the synergistic effect of crystal-domain cross-linking and chelation cross-linking, without the need for specific structure design or adding other reinforcements.

View Article and Find Full Text PDF

With the rapid development of wearable electronic devices, flexible supercapacitors have gained strong interest. However, traditional sandwich supercapacitors have weak interfacial binding, resulting in high interface resistance and poor deformability. Herein, a self-healing integrated supercapacitor based on a polyacrylic acid-polyisodecyl methacrylate-CoSO gel polymer electrolyte (GPE) was developed.

View Article and Find Full Text PDF

The specific ion effect (SIE), the control of polymer solubility in aqueous solutions by the added ions, has been a phenomenon known for more than a century. The seemingly simple nature of the ion-polymer-water interactions can lead to complex behaviors, which have also been exploited in many applications in biochemistry, electrochemistry, and energy harvesting. Here, we show an emerging diversification of actuation behaviors in "salty" hydrogel and hydrogel-paper actuators.

View Article and Find Full Text PDF

Assessment of Silver-Copper Co-Loaded Mesoporous Bioactive Glass as an Advanced Pulp-Capping Material.

J Dent

December 2024

Department of Fragrance and Cosmetic Science, College of Pharmacy, Kaohsiung Medical University, Kaohsiung, Taiwan; Drug Development and Value Creation Research Center, Kaohsiung Medical University, Kaohsiung, Taiwan; Department of Medical Research, Kaohsiung Medical University Hospital, Kaohsiung, Taiwan. Electronic address:

Objectives: To evaluate the multifunctionality of silver-copper co-loaded mesoporous bioactive glass (MBG), with the goal of developing an advanced pulp-capping material.

Methods: The synthesis of materials was conducted using the sol-gel method, following the approach described in previous studies but with some modifications. The composition included 80 mol% SiO₂, 15 mol% CaO, and 5 mol% P₂O₅, with additional components of 5 mol% silver, 5 mol% copper, or 1 mol% silver combined with 4 mol% copper, designated as Ag5/80S, Cu5/80S, or Ag1Cu4/80S, respectively.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!