We report the first, to the best of our knowledge, femtosecond-laser-pumped optical parametric oscillator (OPO) based on the newly developed nonlinear crystal, CdSiP₂. The OPO was synchronously pumped by a mode-locked Yb:KYW/Yb:fiber master-oscillator power amplifier, providing 1.053 μm pump pulses with durations of 130 fs at a repetition rate of 100 MHz. The 0.5-mm-thick CdSiP₂ crystal was cut for a type-I noncritical interaction, providing a broad phase-matching bandwidth and ensuring excellent temporal overlap among the pump, signal, and idler pulses. The OPO generated signal pulses with a spectral coverage over 1260-1310 nm and mid-infrared idler pulses with a broad spectral coverage at 5.8-6.6 μm (6.2 THz). With a 2% output coupler (OC), the threshold pump power was 600 mW. At the maximum pump power of 1.6 W, 0.55 W was absorbed due to two-photon absorption and residual linear absorption in the CdSiP₂ crystal, 0.75 W was transmitted, and 53 mW signal power was extracted through the OC. We estimate that the generated idler power was 24 mW.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OL.38.005110DOI Listing

Publication Analysis

Top Keywords

optical parametric
8
parametric oscillator
8
100 mhz
8
cdsip₂ crystal
8
idler pulses
8
spectral coverage
8
pump power
8
pulses
5
power
5
femtosecond-laser pumped
4

Similar Publications

This study aims to evaluate the quantitative changes in retinal nerve fiber layer (RNFL) thickness and radial peripapillary capillary (RPC) vessel density in patients with chronic central serous chorioretinopathy (CSCR), specifically excluding the peripapillary region. A prospective case-control study was conducted at the Antalya Training and Research Hospital, Health Sciences University, involving 65 patients with chronic CSCR. Participants were categorized into two groups based on the presence or regression of subretinal fluid (SRF).

View Article and Find Full Text PDF

AgGaS and Derivatives: Design, Synthesis, and Optical Properties.

Nanomaterials (Basel)

January 2025

College of Electronic and Optical Engineering and College of Flexible Electronics (Future Technology), Nanjing University of Posts and Telecommunications, Nanjing 210023, China.

Silver gallium sulfide (AgGaS) is a ternary ABX-type semiconductor featuring a direct bandgap and high chemical stability. Structurally resembling diamond, AgGaS has gained considerable attention as a highly promising material for nonlinear optical applications such as second harmonic generation and optical parametric oscillation. In attempts to expand the research scope, on the one hand, AgGaS-derived bulk materials with similar diamond-like configurations have been investigated for the enhancement of nonlinear optics performance, especially the improvement of laser-induced damage thresholds and/or nonlinear coefficients; on the other hand, nanoscale AgGaS and its derivatives have been synthesized with sizes as low as the exciton Bohr radius for the realization of potential applications in the fields of optoelectronics and lighting.

View Article and Find Full Text PDF

The current study aimed to quantify the length progression of enamel microcracks (EMCs) after debonding metal and ceramic brackets, implementing OCT as a diagnostic tool. The secondary objectives included a three-dimensional assessment of EMC width and depth and the formation of new EMCs. OCT imaging was performed on 16 extracted human premolars before bonding and after debonding.

View Article and Find Full Text PDF

Individuals with Down syndrome (DS) often present with severe periodontal disease at a young age. Adjuvant treatments to scaling and root planing (SRP), such as antimicrobial photodynamic therapy (aPDT), may benefit this population. This study evaluated the effectiveness of aPDT as an adjunct to SRP in individuals with DS.

View Article and Find Full Text PDF

The integrated frequency comb generator based on Kerr parametric oscillation has led to chip-scale, gigahertz-spaced combs with new applications spanning hyperscale telecommunications, low-noise microwave synthesis, light detection and ranging, and astrophysical spectrometer calibration. Recent progress in lithium niobate (LiNbO) photonic integrated circuits (PICs) has resulted in chip-scale, electro-optic (EO) frequency combs, offering precise comb-line positioning and simple operation without relying on the formation of dissipative Kerr solitons. However, current integrated EO combs face limited spectral coverage due to the large microwave power required to drive the non-resonant capacitive electrodes and the strong intrinsic birefringence of LiNbO.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!