Bioremediation using enzymes has become an attractive approach for removing hazardous chemicals such as organophosphate pesticides from the environment. Enzymes immobilized on solid carriers are particularly suited for such applications. In this study, the organophosphate degrading enzyme A (OpdA) was covalently immobilized on highly porous nonwoven polyester fabrics for organophosphate pesticide degradation. The fabrics were first activated with ethylenediamine to introduce free amine groups, and the enzyme was then attached using the bifunctional crosslinker glutaraldehyde. The immobilization only slightly increased the Km (for methyl parathion, MP), broadened the pH profile such that the enzyme had significant activity at acidic pH, and enhanced the stability of the enzyme. The OpdA-functionalized fabrics could be stored in a phosphate buffer or in the dry state at 4°C for at least 4 weeks without a large loss of activity. When used in batch mode, the functionalized textiles could degrade 20 μM MP in un-buffered water at liquor to fabric ratios as high as 5000:1 within 2h, and could be used repeatedly. The fabrics could also be made into columns for continuous pesticide degradation. The columns were able to degrade 50 μM MP at high flow rates, and could be used repeatedly over 2 months. These results demonstrate that OpdA immobilized on nonwoven polyester fabrics is useful in environmental remediation of organophosphate compounds.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.enzmictec.2013.10.001 | DOI Listing |
Polymers (Basel)
November 2024
St. Petersburg State University, 7/9 Universitetskaya Nab., St. Petersburg 199034, Russia.
Segmented polymers, such as polyether block amide (PEBA), exhibit unique properties due to the combination of different segments. PEBA consists of soft polyester and rigid polyamide blocks, enabling its use in various industrial applications, including membrane technologies. In this study, PEBA membranes modified with a holmium-based metal-organic framework (Ho-1,3,5-Hbtc) were developed for enhanced pervaporation separation of water/isopropanol and water/phenol mixtures.
View Article and Find Full Text PDFPolim Med
December 2024
Department of Polymer Engineering and Technology, Faculty of Chemistry, Wroclaw University of Science and Technology, Poland.
Background: One of the key challenges in tissue engineering area is the creation of biocompatible scaffolds that support cell growth and mimic the structural and mechanical properties of native tissues. Among various materials used for scaffold fabrication, composite materials based on biodegradable polymers reinforced with bioactive inorganic fillers have attracted significant attention due to their properties. One of the important problems with the preparation of composite electrospun fibers is the low filler content in the fiber.
View Article and Find Full Text PDFACS Omega
November 2024
Department of Textiles, Merchandising and Interiors, University of Georgia, Athens, Georgia 30602, United States.
Eco-friendly materials must replace pure synthetic materials to protect the environment and improve human welfare. This study uses a blow room-integrated carding machine to create a filmy web by properly mixing modified jute and polyester fibers. Jute-polyester fiber blended carded webs have been utilized to produce jute-based hybrid nonwoven fabrics (JHNFs), which are subsequently given an antibacterial treatment by spraying a solution of silver nitrate, ethanol, and ammonia.
View Article and Find Full Text PDFWaste Manag Res
September 2024
Department of Textile and Fibre Engineering, Indian Institute of Technology Delhi, New Delhi, India.
The textile industry along with construction, electronics and plastic generate huge amounts of waste posing challenges to the adoption of the circular economy. This research presents a sustainable and low-cost recycling technology for conversion of post-consumer textile (denim) wastes to useful insulation materials. To accomplish the objective, nonwoven materials were produced using varying proportions of post-consumer recycled denim (r-denim) fibre and hollow polyester (PET) fibre using different punch densities in the needle punching process.
View Article and Find Full Text PDFBiopolymers
January 2025
Department of Chemistry and Chemical Processing Technologies, Kocaeli University, Kocaeli, Türkiye.
In this study, poly(lactic acid) (PLA)-tetrapropylammonium chloride (TCL)-poly(ethylene glycol) (PEG) nonwoven networks were produced using PLA, PEG with different concentrations (3, 5, 7, and 9 wt%), and TCL. PEG is included as a plasticizer in PLA polymer, which has high biocompatibility but a brittle structure. The importance of this study is to investigate the effect of TCL salt on the characterization of PLA-PEG nanofibers.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!