Electrical and mechanical properties as a processing condition in polyvinylchloride multi walled carbon nanotube composites.

We investigated the electrical conductivity (sigma) and mechanical property of polyvinylchloride/carbon nanotube composites as a function of the CNT content and processing time during a solid-state process of high speed vibration mixing (HSVM) and high energy ball milling (HEBM). Both processes were suggested to avoid high temperatures, solvents, chemical modification of carbon nanotubes. In this study, the percolation threshold (phi(c)) for electrical conduction is about 1 wt% CNT with a sigma value of 0.21 S/m, and the electrical conductivity is higher value than that reported by other researchers from melt mixing process or obtained from the other solid-state processes. We found that the dispersion of CNTs and morphology change from CNT breaking are closely related to sigma. Especially, a large morphology change in the CNTs was occurred at the specific processing time, and a significant decrease in the electrical conductivity of polyvinylchloride/carbon nanotube composite occurred in this condition. A meaningful increase of electrical properties and mechanical property is observed in the sample with about 1-2 wt% CNT contents sintered at 200 degrees C after the milling for 20 min by HEBM process. Our study indicates the proper process condition required to improve sigma of PVC/CNT composites.