Herein a comparative study of five nanocrystalline cerium oxides (CeO(2-delta)) synthesised by different methods and calcined at 500 degrees C is reported. XRPD analysis showed that stoichiometry parameter delta, crystallite size/strain and lattice constant were only slightly affected by the method utilized. All ceria nanoparticles are nearly spherical in shape with faceted morphology, free of defects and with a relatively uniform size distribution. The average microstrain was found to be approximately 10 times higher than that of bulk counterpart. The absorption edge of nanocrystalline materials was shifted towards a higher wavelengths (red shift) in comparison with bulk counterpart, and band gap values were in the range 2.7-3.24 eV (3.33 eV for bulk counterpart).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1166/jnn.2013.7774 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Observing non-Hermiticity induced chirality breaking in a synthetic Hall ladder.
Light Sci Appl
January 2025
State Key Laboratory of Advanced Optical Communication Systems and Networks, School of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai, 200240, China.
Non-Hermitian topological photonics plays a key role in bridging topological matter with gain and loss engineering in optics. Here we report the experimental observation of the break of chiral currents in a Hall ladder from the non-Hermiticity by constructing synthetic frequency dimension in two rings, where currents on both legs of the ladder co-propagate in the same direction. The origin of such phenomena is resulted from the interplay between the effective magnetic flux and the on-site gain and loss.
View Article and Find Full Text PDFA-site composition tuning in methylammonium-based metal halide perovskite colloidal nanocrystals.
Nanoscale
January 2025
Polymers and Functional Materials Division, CSIR-Indian Institute of Chemical Technology, Uppal Road, Tarnaka, Hyderabad, 500007, India.
Utilizing the soft-lattice nature of metal halide perovskites, we employ post-synthetic cross-ion exchange to synthesize a series of narrow band-gap colloidal nanocrystals of methylammonium-based lead iodide solid solutions of composition FAMAPbI, as well as those of triple-cation composition CsFAMAPbI (TCPbI). The ability to finely tune the compositions not only helps in tailoring the optical properties in the near-infrared region, but also improves the stability of these colloidal nanocrystals towards moisture, which has been demonstrated as compared to their bulk counterparts. The thermal stability of these solid solutions is also comparable to that of the bulk, as evidenced by thermogravimetric studies.
View Article and Find Full Text PDFNovel approach to enhance the efficiency of mortar against radiations by co-incorporation of lead and boron compounds with calcium chloride.
Sci Rep
January 2025
Raw Building Materials Technology and Processing Research Institute, Housing & Building National Research Center, HBRC, Cairo, Egypt.
Fabrication of heavy density mortar using aggregates reinforced with available solid inorganic chemical additives is of a great importance as a protective layer to mitigate radiations in nuclear facilities. The effect of lead oxide and borax decahydrate on the hydration kinetics was evaluated by determining setting time, leachability and compressive strength. To speed up the reaction, 0.
View Article and Find Full Text PDFUltrafast Lithium-Ion Transport Engineered by Nanoconfinement Effect.
Adv Mater
January 2025
School of Materials Science and Engineering, Beihang University, Beijing, 100191, China.
Article Synopsis
- The study highlights the impressive lithium ionic conductivity achieved using graphene oxide laminar membranes, which significantly exceeds that of traditional lithium-ion electrolytes.
- At 170 mS cm, the nanoconfined lithium electrolyte demonstrates extraordinary performance, maintaining useful conductivity even at extremely low temperatures.
- The findings suggest that the enhanced ion transport is due to unique layer distribution effects in the nanochannels, potentially revolutionizing energy storage technologies by integrating these channels into lithium battery components.
Vacuum electrospray deposition for face-on orientation and interface preservation in organic photovoltaics.
Sci Rep
January 2025
Department of Physics, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul, 03722, Republic of Korea.
Despite recent advancements in organic photovoltaics (OPVs), further improvements in power conversion efficiency (PCE) and device lifetime are necessary for commercial viability. Strategies such as optimizing the molecular orientation and minimizing the charge traps of organic films are particularly effective in enhancing photovoltaic performance. In this study, we successfully utilized vacuum electrospray deposition (VESD) to achieve favourable face-on stacking geometries while preserving the integrity of the interfaces in poly(3-hexylthiophene-2,5-diyl) (P3HT): [6,6]-phenyl-C-butyric acid methyl ester (PCBM) bulk heterojunction (BHJ) films.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!