Transverse mode discrimination is demonstrated in long-wavelength wafer-fused vertical-cavity surface-emitting lasers using ring-shaped air gap patterns at the fused interface between the cavity and the top distributed Bragg reflector. A significant number of devices with varying pattern dimensions was investigated by on-wafer mapping, allowing in particular the identification of a design that reproducibly increases the maximal single-mode emitted power by about 30 %. Numerical simulations support these observations and allow specifying optimized ring dimensions for which higher-order transverse modes are localized out of the optical aperture. These simulations predict further enhancement of the single-mode properties of the devices with negligible penalty on threshold current and emitted power.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.21.026983 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Beyond Boundaries: Breast Cancer Metastasizing to Colon-An Insight into a Rare yet Significant Clinical Scenario: A Case Series.
Euroasian J Hepatogastroenterol
December 2024
Department of General Surgery, King Hamad University Hospital, Muharraq, Bahrain.
Background: Colorectal metastasis from primary breast cancer is rare and presents a challenge for diagnosis and treatment.
Aim: To report two cases of colorectal metastasis from a primary invasive lobular breast carcinoma (ILBC) with different presentations while discussing the mode of diagnosis, immunohistochemistry (IHC), course of treatment, and response.
Case 1: A 47-year-old female, with a known case of bilateral invasive lobular breast cancer, was diagnosed in 2015 and staged as p Tx N3 M0.
Degeneration of the nucleus pulposus affects the internal volumetric strains and failure location of adjacent human metastatic vertebral bodies.
Acta Biomater
January 2025
Department of Industrial Engineering, School of Engineering and Architecture, University of Bologna, Viale del Risorgimento 2, 40136, Bologna, Italy. Electronic address:
Intervertebral disc (IVD) degeneration is suspected to affect the distribution of stress and strain near the vertebral endplates and in the underlying bone. This scenario is worsened by the presence of metastatic lesions on the vertebrae (primarily thoracic vertebrae (60-80%)) which increase the risk of fracture. As such, this study aimed to evaluate the effect of IVD degeneration on the internal volumetric strains and failure modes of human metastatic vertebral bodies.
View Article and Find Full Text PDFAn ultrasensitive angular interrogation metasurface sensor based on the TE mode surface lattice resonance.
Microsyst Nanoeng
January 2025
National Key Laboratory of Advanced Micro and Nano Manufacture Technology, Beijing, 100871, PR China.
The localized surface plasmon resonance metasurface is a research hotspot in the sensing field since it can enhance the light-matter interaction in the nanoscale, but the wavelength sensitivity is far from comparable with that of prism-coupled surface plasmon polariton (SPP). Herein, we propose and demonstrate an ultrasensitive angular interrogation sensor based on the transverse electric mode surface lattice resonance (SLR) mechanism in an all-metal metasurface. In theory, we derive the sensitivity function in detail and emphasize the refraction effect at the air-solution interface, which influences the SLR position and improves the sensitivity performance greatly in the wide-angle.
View Article and Find Full Text PDFHigh-Performance CP Magneto-Electric Dipole Antenna Fed by Printed Ridge Gap Waveguide at Millimeter-Wave.
Sensors (Basel)
December 2024
Centre-Energie Materiaux et Telecommunications, Institut National de la Recherche Scientifique, Montreal, QC H5A 1K6, Canada.
This paper presents a high-performance circularly polarized (CP) magneto-electric (ME) dipole antenna optimized for wideband millimeter-wave (mm-wave) frequencies, specifically targeting advancements in 5G and 6G technologies. The CP antenna is excited through a transverse slot in a printed ridge gap waveguide (PRGW), which operates in a quasi-transverse electromagnetic (Q-TEM) mode. Fabricated on Rogers RT 3003 substrate, selected for its low-loss and cost-effective properties at high frequencies, the design significantly enhances both impedance and axial ratio (AR) bandwidths.
View Article and Find Full Text PDFFinite Element Simulation of Acoustic Emissions from Different Failure Mechanisms in Composite Materials.
Materials (Basel)
December 2024
Department of Mechanical Engineering, North Carolina A & T State University,1601 E. Market Street, Greensboro, NC 27411, USA.
Damage in composite laminates evolves through complex interactions of different failure modes, influenced by load type, environment, and initial damage, such as from transverse impact. This paper investigates damage growth in cross-ply polymeric matrix laminates under tensile load, focusing on three primary failure modes: transverse matrix cracks, delaminations, and fiber breaks in the primary loadbearing 0-degree laminae. Acoustic emission (AE) techniques can monitor and quantify damage in real time, provided the signals from these failure modes can be distinguished.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!