A controlled shunting of polycrystalline oxide thin films on the nanometer length scale opens the door to significantly modify their transport properties. In this paper, the low energy Ar(+) irradiation induced shunting effect of forming-free, non-volatile resistive switching in polycrystalline BiFeO3 thin film capacitor-like structures with macroscopic bottom and top contacts was investigated. Oxygen atoms at the BiFeO3 surface are preferentially sputtered by Ar(+) ion irradiation and oxygen vacancies and a metallic Bi phase are formed at the surface of the BiFeO3 thin film before deposition of the top contacts. A phenomenological model is that of nanoscale shunt resistors formed in parallel to the actual BiFeO3 thin film capacitor-like structure. This model fits the noticeable increase of the retention stability and current density after irradiation. The formation of stable and conductive shunts is further evidenced by conductive atomic force microscopy measurements.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/am404144c | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Self-Poled Bismuth Ferrite Thin Film Micromachined for Piezoelectric Ultrasound Transducers.
Adv Mater
December 2024
Institute for Superconducting and Electronic Materials, Faculty of Engineering and Information Sciences, University of Wollongong, Innovation Campus, North Wollongong, NSW, 2500, Australia.
Piezoelectric micromachined ultrasound transducers (pMUTs), especially those using lead-free materials, are crucial next-generation microdevices for precise actuation and sensing, driving advancements in medical, industrial, and environmental applications. Bismuth ferrite (BiFeO) is emerging as a promising lead-free piezoelectric material to replace Pb(Zr,Ti)O in pMUTs. Despite its potential, the integration of BiFeO thin films into pMUTs has been hindered by poling issues.
View Article and Find Full Text PDFTuning Self-Polarization of Epitaxial BiFeO Thin Films through Interface Effects.
ACS Appl Mater Interfaces
December 2024
Intelligent Materials Lab, School of Physics and Materials Science, Nanchang University, Nanchang 330031, People's Republic of China.
Interface effects and strain engineering have emerged as critical strategies for modulating polarization and internal electric fields in ferroelectric materials, playing a vital role in exploring coupling mechanisms and developing ferroelectric diode devices. In this study, we selected BiFeO as a representative ferroelectric material and utilized interface engineering to control its polarization. By precisely manipulating the atomic stacking sequence at the interface, we influenced the electrostatic potential step across the interface, resulting in a bias voltage in the ferroelectric hysteresis loops that defined the ferroelectric state.
View Article and Find Full Text PDFPhotocurrent Polarity-Switchable Imaging of Single Living Cells by Light-Addressable Electrochemical Sensor.
Anal Chem
December 2024
Department of Biophysics, School of Basic Medical Sciences, Health Science Center, Xi'an Jiaotong University, Xi'an 710061, China.
Article Synopsis
- The light-addressable electrochemical sensor (LAES) is a novel tool for imaging single cells without the need for labels or probes.
- Researchers developed a BiFeO thin film that can switch photocurrent polarity by changing the external voltage, allowing for more versatile imaging of living cells.
- The study successfully demonstrated that this new imaging method can observe dynamic changes in photocurrents in response to cellular treatments, providing valuable insights into cell behavior and expanding LAES applications.
Interface Engineering in All-Oxide Photovoltaic Devices Based on Photoferroelectric BiFeCoO Thin Films.
ACS Appl Electron Mater
November 2024
Institut de Ciència de Materials de Barcelona, ICMAB-CSIC, Campus UAB, Bellaterra 08193, Spain.
Article Synopsis
- Photoferroelectric BiFeO (BFO) is a lead-free material being studied for use in thin film photovoltaic devices, but its efficiency remains low despite ongoing improvements in device architecture.
- This research investigates how adding a ZnO layer to a BiFeCoO (BFCO) heterostructure affects its ferroelectric and photoresponse properties, revealing a significant increase in short circuit current when compared to devices without ZnO.
- Findings indicate that the enhanced performance is due to better band energy alignment at the ZnO/BFCO interface, which minimizes charge recombination, highlighting ZnO's potential in improving the functionality of BFO-based optoelectronic devices.
First Principles Study of Bismuth Vacancy Formation in (111)-Strained BiFeO.
Materials (Basel)
November 2024
Department of Material Science and Engineering, NTNU Norwegian University of Science and Technology, N-7491 Trondheim, Norway.
Article Synopsis
- * Using density functional theory, the research examines Bi vacancies and Bi-O vacancy pairs in BiFeO (BFO) under different levels of (111) epitaxial strain, revealing that compressive strain lowers vacancy formation energy while tensile strain raises it.
- * The study finds that out-of-plane vacancy pairs are more stable under both types of strain, with significant energy reductions, and discusses how these results relate to Bi stoichiometry and conductivity in thin films.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!