Determination of respiratory system mechanics during inspiration and expiration by FLow-controlled EXpiration (FLEX): a pilot study in anesthetized pigs.

Background: Differences between inspiratory and expiratory lung mechanics result in the hysteresis of the pressure volume-loop. While hysteresis area is a global parameter describing the difference between inspiration and expiration in mechanics under quasi-static conditions, a detailed analysis of this difference under the dynamic conditions of mechanical ventilation is feasible once inspiratory and expiratory compliance (Cin/Cex) are determined separately. This requires uncoupling of expiratory flow rate and volume (V).

Methods: Five piglets were mechanically ventilated at positive end-expiratory pressure (PEEP) levels ranging from 0 to 15 cmH2O. Expiratory flow rate was linearized by a computer-controlled resistor (flow-controlled expiration). The volume-dependent Cin(V) and Cex(V) profiles were calculated from the tracheal pressure volume-loops.

Results: The intratidal curve-progression of Cex(V) was altogether higher with a steeper slope compared to Cin(V). With increasing positive end-expiratory pressure (PEEP) dynamic hysteresis area decreased and Cex(V) tended to run more parallel to Cin(V).

Conclusion: The relation between inspiratory and expiratory compliance profiles is associated with the hysteresis area and behaves PEEP dependent. Analysing the Cin-Cex-relation might therefore potentially offer a new approach to titrate PEEP and tidal volume.