We present a novel approach towards achieving high visible transmittance for vanadium dioxide (VO(2)) coated surfaces whilst maintaining the solar energy transmittance modulation required for smart-window applications. Our method deviates from conventional approaches and utilizes subwavelength surface structures, based upon those present on the eyeballs of moths, that are engineered to exhibit broadband, polarization insensitive and wide-angle antireflection properties. The moth-eye functionalised surface is expected to benefit from simultaneous super-hydrophobic properties that enable the window to self-clean. We develop a set of design rules for the moth-eye surface nanostructures and, following this, numerically optimize their dimensions using parameter search algorithms implemented through a series of Finite Difference Time Domain (FDTD) simulations. We select six high-performing cases for presentation, all of which have a periodicity of 130 nm and aspect ratios between 1.9 and 8.8. Based upon our calculations the selected cases modulate the solar energy transmittance by as much as 23.1% whilst maintaining high visible transmittance of up to 70.3%. The performance metrics of the windows presented in this paper are the highest calculated for VO(2) based smart-windows.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/OE.21.00A750 | DOI Listing |
Self-adaptive photothermal (PT) and radiative cooling (RC) based on insulation-metal phase transition vanadium dioxide (VO) are among the most promising continuous energy harvesting technologies recently. However, previous work relies on rigid substrates that cannot fit complex or non-planar surfaces. Here, we propose a flexible composite film by bonding a VO thin film and a polyimide (PI) substrate with polymethyl methacrylate (PMMA), which achieves efficient spectrally self-adaptive broadband absorption/emission and can convert between the daytime PT mode and nighttime RC mode.
View Article and Find Full Text PDFNanoscale Horiz
November 2024
Deparment of Materials Science and Engineering, Indian Institute of Technology, Delhi, Hauz Khas, New Delhi 110016, India.
ACS Appl Mater Interfaces
October 2024
Department of Physics and NTIS-European Centre of Excellence, University of West Bohemia, Univerzitní 8, 30100 Plzeň, Czech Republic.
We report strongly thermochromic YSZ/VWSrO/SiO coatings, where YSZ is Y-stabilized ZrO, prepared by using a scalable deposition technique on standard glass at a low substrate temperature of 320 °C and without any substrate bias voltage. The coatings exhibit a transition temperature of 22 °C with an integral luminous transmittance of 63.7% (low-temperature state) and 60.
View Article and Find Full Text PDFLight Sci Appl
September 2024
Department of Materials Science and Engineering, Centre for Functional Photonics, and Hong Kong Branch of National Precious Metals Material Engineering Research Centre, City University of Hong Kong, Kowloon, Hong Kong, 999077, China.
Thermochromic coatings hold promise in reducing building energy consumption by dynamically regulating the heat gain of windows, which are often regarded as less energy-efficient components, across different seasons. Vanadium dioxide (VO) stands out as a versatile thermochromic material for smart windows owing to its reversible metal-to-insulator transition (MIT) alongside correlated structural and optical properties. In this review, we delve into recent advancements in the phase-change VO-based thermochromic coatings for smart windows, spanning from the macroscopic crystal level to the microscopic structural level (including elemental doping and micro/nano-engineering), as well as advances in controllable fabrication.
View Article and Find Full Text PDFAcc Chem Res
October 2024
State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, China.
ConspectusZinc-ion batteries (ZIBs) are highly promising for large-scale energy storage because of their safety, high energy/power density, low cost, and eco-friendliness. Vanadium-based compounds are attractive cathodes because of their versatile structures and multielectron redox processes (+5 to +3), leading to high capacity. Layered structures or 3-dimensional open tunnel frameworks allow easy movement of zinc-ions without breaking the structure apart, offering superior rate-performance.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!