Delivery of medication to the neonatal lung using current methods is inefficient. Aerosols offer one way to improve delivery to small airways. In this in vitro work, aerosol delivery by using a micropump or a rotary valve has been evaluated in a model of the neonatal setting with a pressurised metered dose inhaler plus spacer outside of the inspiratory limb. Drug depositions were assessed by spectrophotometric analyses. Drug lung deposition was increased by adjusting the rotary valve for co-ordination between the inhalation and aerosol delivery, but this intermittent mode decreased the aerosol delivery by using the micropump. Also, decreasing the volume of spacer decreased drug deposition in test lungs by using the micropump system. At the optimum conditions, the rotary valve aerosol delivery system delivered 3.68±0.91% of the Qvar nominal dose to the test lungs, and this was 2.34±0.01% for the micropump system. In conclusion, the rotary valve aerosol delivery system provided higher amounts of drug particles to the test lungs compared to the micropump system. The advantages of these methods were that the humidity in the ventilation circuit did not affect the aerosol particles in the spacer. Further optimisation is required to improve aerosol deposition in the test lungs. The article has also a short section of recent patents relevant to aerosol delivery.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.2174/18722113113076660012 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Inhalable Mucociliary-On-Chip System Revealing Pulmonary Clearance Dynamics in Nanodrug Delivery.
ACS Nano
January 2025
Department of Electrical and Computer Engineering, National Yang Ming Chiao Tung University, Hsinchu 30010, Taiwan.
The development of a inhaled nanodrug delivery assessment platform is crucial for advancing treatments for chronic lung diseases. Traditional in vitro models and commercial aerosol systems fail to accurately simulate the complex human respiratory patterns and mucosal barriers. To address this, we have developed the breathing mucociliary-on-a-chip (BMC) platform, which replicates mucociliary clearance and respiratory dynamics in vitro.
View Article and Find Full Text PDFDevelopment and Characterization of Novel Combinations and Compositions of Nanostructured Lipid Carrier Formulations Loaded with Trans-Resveratrol for Pulmonary Drug Delivery.
Pharmaceutics
December 2024
Department of Pharmaceutical Sciences, College of Pharmacy, QU Health Sector, Qatar University, Doha 2713, Qatar.
Background/objectives: This study aimed to fabricate, optimize, and characterize nanostructured lipid carriers (NLCs) loaded with trans-resveratrol (TRES) as an anti-cancer drug for pulmonary drug delivery using medical nebulizers.
Methods: Novel TRES-NLC formulations (F1-F24) were prepared via hot, high-pressure homogenization. One solid lipid (Dynasan 116) was combined with four liquid lipids (Capryol 90, Lauroglycol 90, Miglyol 810, and Tributyrin) in three different ratios (10:90, 50:50, and 90:10 /), with a surfactant (Tween 80) in two different concentrations (0.
Enhanced Stability and In Vitro Biocompatibility of Chitosan-Coated Lipid Vesicles for Indomethacin Delivery.
Pharmaceutics
December 2024
Department of Pharmacology, Faculty of Medicine, 'Grigore T. Popa' University of Medicine and Pharmacy, 700115 Iasi, Romania.
Background: Lipid vesicles, especially those utilizing biocompatible materials like chitosan (CHIT), hold significant promise for enhancing the stability and release characteristics of drugs such as indomethacin (IND), effectively overcoming the drawbacks associated with conventional drug formulations.
Objectives: This study seeks to develop and characterize novel lipid vesicles composed of phosphatidylcholine and CHIT that encapsulate indomethacin (IND-ves), as well as to evaluate their in vitro hemocompatibility.
Methods: The systems encapsulating IND were prepared using a molecular droplet self-assembly technique, involving the dissolution of lipids, cholesterol, and indomethacin in ethanol, followed by sonication and the gradual incorporation of a CHIT solution to form stable vesicular structures.
Investigation of Spray Drying Parameters to Formulate Novel Spray-Dried Proliposome Powder Formulations Followed by Their Aerosolization Performance.
Pharmaceutics
December 2024
School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University, Liverpool L3 3AF, UK.
Background: Spray drying, whilst a popularly employed technique for powder formulations, has limited applications for large-scale proliposome manufacture.
Objectives: Thus, the aim of this study was to investigate spray drying parameters, such as inlet temperature (80, 120, 160, and 200 °C), airflow rate (357, 473, and 601 L/h) and pump feed rate (5, 15, and 25%), for individual carbohydrate carriers (trehalose, lactose monohydrate (LMH), and mannitol) for 24 spray-dried (SD) formulations (F1-F24).
Methods: Following optimization, the SD parameters were trialed on proliposome formulations based on the same carriers and named as spray-dried proliposome (SDP) formulations.
Development and Characterization of Spray-Dried Combined Levofloxacin-Ambroxol Dry Powder Inhaler Formulation.
Pharmaceutics
November 2024
Pharmacy Discipline, School of Clinical Sciences, Faculty of Health, Queensland University of Technology, Brisbane, QLD 4000, Australia.
This study explores the development and characterization of spray-dried composite microparticles consisting of levofloxacin (LVX, a broad-spectrum antibiotic), and ambroxol (AMB, a mucolytic agent that has antibacterial and antibiofilm properties), for the intended application of the drug against lower respiratory tract infections (LRTIs). A range of LVX to AMB mass ratios (1:1, 1:0.5, and 1:0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!