We describe and test a new approach to particle velocimetry, based on imaging and cross correlating the scattering speckle pattern generated on a near-field plane by flowing tracers with a size far below the diffraction limit, which allows reconstructing the velocity pattern in microfluidic channels without perturbing the flow. As a matter of fact, adding tracers is not even strictly required, provided that the sample displays sufficiently refractive-index fluctuations. For instance, phase separation in liquid mixtures in the presence of shear is suitable to be directly investigated by this "ghost particle velocimetry" technique, which just requires a microscope with standard lamp illumination equipped with a low-cost digital camera. As a further bonus, the peculiar spatial coherence properties of the illuminating source, which displays a finite longitudinal coherence length, allows for a 3D reconstruction of the profile with a resolution of few tenths of microns and makes the technique suitable to investigate turbid samples with negligible multiple scattering effects.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1103/PhysRevLett.111.048101 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effects of Hydroxyapatite Additions on Alginate Gelation Kinetics During Cross-Linking.
Polymers (Basel)
January 2025
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, 02150 Espoo, Finland.
Alginate hydrogels have gathered significant attention in biomedical engineering due to their remarkable biocompatibility, biodegradability, and ability to encapsulate cells and bioactive molecules, but much less has been reported on the kinetics of gelation. Scarce experimental data are available on cross-linked alginates (AL) with bioactive components. The present study addressed a novel method for defining the crosslinking mechanism using rheological measurements for aqueous mixtures of AL and calcium chloride (CaCl) with the presence of hydroxyapatite (HAp) as filler particles.
View Article and Find Full Text PDFRheological Behavior of Oil Well Cement Slurries with Addition of Core/Shell TiO@SiO Nanoparticles-Effect of Superplasticizer and Temperature.
Materials (Basel)
January 2025
Eduardo Torroja Institute for Construction Sciences (IETcc-CSIC), C/Serrano Galvache, 4, 28033 Madrid, Spain.
This study investigates the rheological behavior of oil well cement pastes (OWCPs) modified with core/shell TiO@SiO (nTS) nanoparticles and polycarboxylate-ether (PCE) superplasticizers at different temperatures (25, 45, and 60 °C). Results show that nTS particles increased static and dynamic yield stresses and the apparent viscosity of the cement slurries due to an increased solid volume fraction and reduced free water availability. The increase in the slurry dispersion by adding PCE superplasticizers enhanced the effect of the nanoparticles on the rheological parameters.
View Article and Find Full Text PDFDrop Dynamics during Condensation on Superhydrophobic Surfaces in Vapor Shear Flow.
Langmuir
January 2025
Brigham Young University, Provo, Utah 84602, United States.
Accurate models for predicting drop dynamics, such as maximum drop departure sizes, are crucial for estimating heat transfer rates during condensation on superhydrophobic (SH) surfaces. Previous studies have focused on examining the heat transfer rates for SH surfaces under the influence of gravity or vapor flowing over the surface. This study investigates the impact of surface solid fraction and texture scale on drop mobility in a condensing environment with a humid air flow.
View Article and Find Full Text PDFDevelopment of Extrudable Hydrogels Based on Carboxymethyl Cellulose-Gelatin Complex Coacervates.
Gels
January 2025
School of Product Design, University of Canterbury, Christchurch 8041, New Zealand.
This study investigates the 3D extrusion printing of a carboxymethyl cellulose (CMC)-gelatin complex coacervate system. Various CMC-gelatin coacervate hydrogels were prepared and analyzed to achieve this goal. The impact of the CMC-gelatin ratio, pH, and total biopolymer concentration on coacervation formation and rheological properties was evaluated to characterize the printability of the samples.
View Article and Find Full Text PDFSimulation of Flow Around a Finite Rectangular Prism: Influence of Mesh, Model, and Subgrid Length Scale.
Entropy (Basel)
January 2025
Department of Mechanical and Aerospace Engineering, The University of Manchester, Manchester M1 3PL, UK.
This study investigates the flow field around a finite rectangular prism using both experimental and computational methods, with a particular focus on the influence of the turbulence approach adopted, the mesh resolution employed, and different subgrid length scales. Ten turbulence modelling and simulation approaches, including both 'scale-modelling' Reynolds-Averaged Navier-Stokes (RANS) models and 'scale-resolving' Delayed Detached Eddy Simulation (DDES), were tested across six different mesh resolutions. A case with sharp corners allows the location of the flow separation to be fixed, which facilitates a focus on the separated flow region and, in this instance, the three-dimensional interaction of three such regions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!