The efficiency of the electrochemical degradation of synthetic wastewater containing an anthraquinone dye has been comparatively studied in two electrolytic cells with a synthetic boron-doped diamond (Si/BDD) as an anode. The first is an individual cell (Cell 1) with monopolar electrode BDD and the second (Cell 2) has two bipolar electrodes BDD self-polarized. The bulk electrolysis was performed at the same initial operating conditions in order to quantify the influence of the initial pH and current density on dye discoloration and global mineralization removal. The current efficiency and the consumption energy were also evaluated. When the same solutions have been comparatively treated with the two cells, a quite good mineralization is found in Cell 2. This result supposed more fraction of the applied current is used for the electrocombustion reaction on Cell 2 if compared to Cell 1 and small amount rest for the side reaction of oxygen evolution. The HPLC analyses confirmed this hypothesis and showed that the concentration trend of intermediates (sulfanilic acid, phthalate acid and salicylic acid) with electrolysis time was different on two cells. Phototoxicity tests show that the electrochemical oxidation with BDD electrodes could be useful as a pretreatment technique for reducing hazardous wastewater toxicity.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.chemosphere.2013.07.011 | DOI Listing |
Water Res
January 2025
School of Science, RMlT University, Melbourne, VC 3000. Australia.
Electrochemical recovery of zero-valent sulfur (S) from thiourea (TU) wastewater offers a promising waste-to-value strategy that expects to promote the sulfur resource cycle in water treatment but still suffer from electrode poisoning and sulfur over-oxidation. Herein, we designed a metal-free CNT electrochemical membrane for selective oxidation of thiourea and recovery of S. We found that defect sites on the carbon nanotube surface enable direct electron transfer for thiourea oxidation and may form carbon-sulfur bridge bonds, thereby facilitating the generation of S and urea.
View Article and Find Full Text PDFSmall Methods
January 2025
Institute of Physics, Czech Academy of Sciences, Cukrovarnická 10, Prague 6, 162 00, Czech Republic.
Understanding how to tune the properties of electroactive materials is a key parameter for their applications in energy storage systems. This work presents a comprehensive study in tailoring polyaniline (PANI) suspensions by acid-assisted polymerization method and their subsequent deposition on boron-doped diamond (BDD) supports with low/high B concentrations. The porous or densely packed morphology of PANI is successfully controlled by varying the monomer-to-initiator ratio.
View Article and Find Full Text PDFACS Omega
December 2024
China Institute of Atomic Energy, Beijing 102413, China.
Various electrochemical tests were carried out to elucidate the electrolytic oxidation mechanism of oxalic acid on a boron-doped diamond electrode in a nitric acid environment. These included cyclic voltammetry, AC impedance, constant current electrolysis, and electron paramagnetic resonance spectroscopy. The impact of electrode potential, current density, nitric acid concentration, and electrode plate spacing on the oxidation of oxalic acid was investigated.
View Article and Find Full Text PDFChemosphere
December 2024
Comenius University in Bratislava, Faculty of Natural Sciences, Department of Analytical Chemistry, Ilkovičova 6, SK-842 15 Bratislava, Slovak Republic; University of South Bohemia in České Budějovice, Faculty of Fisheries and Protection of Waters, South Bohemian Research Center of Aquaculture and Biodiversity of Hydrocenoses, Zátiší 728/II, CZ-389 25 Vodňany, Czech Republic. Electronic address:
The highly efficient degradation of persistent organic substances by electrochemical advanced oxidation processes (EAOPs), which don't result in the formation of potentially harmful by-products, is crucial for the future of water management. In this study, boron-doped diamond electrodes (BDDE) with three morphologies (planar 2D, microstructured 2D, and macroporous 3D) were employed for the anodic oxidation of diclofenac (DCF) in two working electrolytes (NaCl and NaSO). In total, 11 by-products formed during the electrochemical oxidation of DCF were identified via HPLC-HRMS.
View Article and Find Full Text PDFACS Appl Polym Mater
December 2024
Department of Precision and Microsystems Engineering, Faculty of Mechanical Engineering, Delft University of Technology, Mekelweg 2, 2628 CD Delft, The Netherlands.
In this work, we pioneered the preparation of diamond-containing flexible electrodes using 3D printing technology. The herein developed procedure involves a unique integration of boron-doped diamond (BDD) microparticles and multi-walled carbon nanotubes (CNTs) within a flexible polymer, thermoplastic polyurethane (TPU). Initially, the process for the preparation of homogeneous filaments with optimal printability was addressed, leading to the development of two TPU/CNT/BDD composite electrodes with different CNT:BDD weight ratios (1:1 and 1:2), which were benchmarked against a TPU/CNT electrode.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!