Spatiotemporal distribution of 137Cs in the sea surrounding Japanese Islands in the decades before the disaster at the Fukushima Daiichi Nuclear Power Plant in 2011.

Sci Total Environ

Research and Survey Group, Head Office, Marine Ecology Research Institute, Towa Edogawabashi Bldg. 7F., Yamabuki-cho 347, Shinjuku-ku, Tokyo 162-0801, Japan. Electronic address:

Published: October 2013

The historic spatiotemporal distribution of 137Cs in the seawaters and sea-floor sediments adjacent to nuclear power plants in Japan are summarized, using data obtained over a period of time more than 20 years prior to the disaster at the Fukushima Daiichi Nuclear Power Plant in 2011. Relatively uniform distributions of 137Cs were observed both in the surface seawaters (1 m in depth) and in deeper seawaters (10 to 30 m above the seabed and ranging from tens to hundreds of meters in depth) independent of the geographical position, although lower concentrations were observed in significantly deeper bottom seawaters. Conversely, there were wide variations in 137Cs levels between sediments, such that higher 137Cs concentrations were observed in the deeper sampling locations. A mathematical model describing the successive transfer of 137Cs from surface waters through deeper waters to sediments suggested that the transfer rate of 137Cs from deep water to the sediments, and the loss rate from bottom sediments, were both greater than the transfer rate from surface water to deeper water. It was found that the calculated regression lines for 137Cs depletion rates over time for surface waters, deeper waters, and sediments were approximately parallel when plotted on a semi-logarithmic coordinate system, regardless of the sampling location. A radionuclide depletion half-life was calculated to be 4 months to 16 years with the geometric mean of 2.22 y for the sediments in the Fukushima region, suggesting that nuclear contamination will be remediated over time through sediment redistribution processes such as remobilization, bioturbation, and migration due to sea currents.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.scitotenv.2013.06.031DOI Listing

Publication Analysis

Top Keywords

nuclear power
12
spatiotemporal distribution
8
137cs
8
distribution 137cs
8
disaster fukushima
8
fukushima daiichi
8
daiichi nuclear
8
power plant
8
plant 2011
8
concentrations observed
8

Similar Publications

Characterizing molten corium-concrete interaction (MCCI) fuel debris in Fukushima reactors is essential to develop efficient methods for its removal. To enhance the accuracy of microscopic observation and focused ion beam (FIB) microsampling of MCCI fuel debris, we developed a three-dimentional FIB scanning electron microscopy (SEM) technique with a multiphase positional misalignment (MPPM) correction method. This system automatically aligns voxel positions, corrects contrast, and removes artifacts from a series of over 500 SEM images.

View Article and Find Full Text PDF

Accurately measuring the thickness of the oxide film that accumulates on nuclear fuel assemblies is critical for maintaining nuclear power plant safety. Oxide film thickness typically ranges from a few micrometers to several tens of micrometers, necessitating a high-precision measurement system. Eddy current testing (ECT) is commonly employed during poolside inspections due to its simplicity and ease of on-site implementation.

View Article and Find Full Text PDF

Steam Generator Maintenance Robot Design and Obstacle Avoidance Path Planning.

Sensors (Basel)

January 2025

College of Resource Environmental and Safety Engineering, University of South China, Hengyang 421001, China.

To solve the issue of inconvenient and dangerous manual operation during the installation and removal of the main pipe plugging plate in the steam generator in nuclear power plants, a ten-degree-of-freedom plugging robot was designed in the present study that includes a collaborative robotic arm coupled with a servo electric cylinder. By establishing a joint coordinate system for the robot model, a D-H parameter model for the plate plugging robot was established, and the forward and inverse kinematics were solved. The volume level approximate convex decomposition algorithm was used to fit the steam generator model with a convex packet, and an experimental simulation platform was constructed.

View Article and Find Full Text PDF

NMR and MD Simulations of Non-Ionic Surfactants.

Molecules

January 2025

Department of Chemistry and Biochemistry, State University of New York Brockport, Brockport, NY 14420, USA.

Non-ionic surfactants are an important solvent in the field of green chemistry with tremendous application potential. Understanding their phase properties in bulk or in confined environments is of high commercial value. In recent years, the combination of molecular dynamics (MD) simulations with multinuclear solid-state NMR spectroscopy and calorimetric techniques has evolved into the most powerful tool for their investigation.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!