Tablet compression of softwood cellulose and lignin prepared by a new catalytic oxidation and acid precipitation method were investigated and compared with the established pharmaceutical direct compression excipients. Catalytic pretreated softwood cellulose (CPSC) and lignin (CPSL) were isolated from pine wood (Pinus sylvestris). The compaction studies were carried out with an instrumented eccentric tablet machine. The plasticity and elasticity of the materials under compression were evaluated using force-displacement treatment and by determining characteristic plasticity (PF) and elasticity (EF) factors. With all biomaterials studied, the PF under compression decreased exponentially as the compression force increased. The compression force applied in tablet compression did not significantly affect the elasticity of CPSC and microcrystalline cellulose (MCC) while the EF values for softwood lignins increased as compression force increased. CPSL was clearly a less plastically deforming and less compactable material than the two celluloses (CPSC and MCC) and hardwood lignin. CPSL presented deformation and compaction behaviour almost identical to that of lactose monohydrate. In conclusion, the direct tablet compression behaviour of native lignins and celluloses can greatly differ from each other depending on the source and isolation method used.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3755154 | PMC |
| http://dx.doi.org/10.1208/s12249-013-0002-x | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of Moisture Sorption and Lactose Type on Tablet Quality: A Hygroscopicity Study between Lactose Powder and Tablets.
Mol Pharm
December 2024
Engineering Research Center of Modern Preparation Technology of Traditional Chinese Medicine of Ministry of Education, Shanghai University of Traditional Chinese Medicine, No.1200, Cai-lun Road, Pudong District, Shanghai 201203, P. R. China.
Lactose is one of the most commonly used tablet diluents and fillers. However, the moisture sorption of lactose powder could exert detrimental effects on the excipient itself, as well as on the tablet quality. The effects of storage relative humidity (RH) conditions for different grades of lactose powders and tablets on compression behavior and tablet qualities were investigated.
View Article and Find Full Text PDFFormulation, Development, and Optimization of Fast Dissolving Tablets Containing Tapentadol Hydrochloride.
Pharm Nanotechnol
December 2024
M.M. College of Pharmacy, Maharishi Markandeshwar Deemed to be University, Mullana- 133203, Ambala, India.
Background: Tapentadol hydrochloride is a potent analgesic commonly used to manage moderate to severe pain. Rapidly dissolving tablets of Tapentadol offer a significant advantage in enhancing patient compliance by providing quick pain relief. The development of fast-dissolving tablets (FDTs) requires careful consideration of formulation parameters to achieve optimal disintegration and dissolution profiles.
View Article and Find Full Text PDFUsing in-line measurement and statistical analyses to predict tablet properties compressed using a Styl'One compaction simulator: A high shear wet granulation study.
Int J Pharm
December 2024
School of Chemical Engineering, The University of Birmingham, Edgbaston, Birmingham B15 2TT, UK.
High shear wet granulation (HSWG) is widely used in tablet manufacturing mainly because of its advantages in improving flowability, powder handling, process run time, size distribution, and preventing segregation. In-line process analytical technology measurements are essential in capturing detailed particle dynamics and presenting real-time data to uncover the complexity of the HSWG process and ultimately for process control. This study is to find relationships between Lenterra in-line measurements and granule properties and tablet properties.
View Article and Find Full Text PDFThe current state-of-the art in pharmaceutical continuous film coating - A review.
Int J Pharm
December 2024
Department of Organic Chemistry and Technology, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111 Budapest, Hungary.
In this decade, one of the major trends in the pharmaceutical industry is the adoption of continuous manufacturing. This requires the development of continuous equivalents of essential pharmaceutical processes such as film coating. The process of film coating is the last step of the processing of solid dosage forms and is critical because it determines the visual appearance of the end product, along with ensuring its stability and possibly even defining the rate of drug release.
View Article and Find Full Text PDFHydrogel-forming microarray patches combined with powder-based reservoir for labetalol hydrochloride transdermal delivery.
Int J Pharm
December 2024
School of Pharmacy, Queen's University Belfast, Medical Biology Centre, 97 Lisburn Road, Belfast BT9 7BL, UK. Electronic address:
Hypertension is the most common pregnancy disorder and can lead to life-threatening conditions for both mother and fetus. However, managing this condition with oral and intravenous labetalol can be challenging, highlighting the need for alternative delivery methods. This study presents, for the first time, the development of novel powder-based reservoirs incorporated with hydrogel-forming microarray patches (MAPs) to facilitate the transdermal delivery of labetalol hydrochloride (HCl).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!