Occupational exposure to non-ionising electromagnetic radiation emitted by train protection (TP) systems operating at ∼27 MHz is investigated in situ. In total, five TP systems of two different types, i.e. KVB (Contrôle de Vitesse par Balises) and TBL1+ (Transmission Balise-Locomotive), are considered. For each type, the boundaries outside which the field levels are in compliance with the International Commission on Non-Ionizing Radiation Protection guidelines for occupational exposure ('compliance boundaries') are determined. Maximal fields of 4.7 A m(-1) and 0.2 kV m(-1) for KVB, and 51 A m(-1) and 1.5 kV m(-1) for TBL1+ are measured, at distances between 10 and 25 cm from the respective antennas. Compliance boundaries for occupational exposure are maximally 0.6 m for KVB to 1 m for TBL1+, while no specific compliance boundary is needed for the general public.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1093/rpd/nct183 | DOI Listing |
Ann Biol Clin (Paris)
January 2025
Hôpital d'Instruction des Armées, Clermont-Tonnerre, Laboratoire Médicale, Brest, France.
This observation reports the case of an occupational allergic asthma in a laboratory technician, caused by exposure to formaldehyde. She experienced feelings of discomfort during low exposure, below the regulatory exposure thresholds. Sent to occupational medicine, signs of an asthma attack were noted by the doctor.
View Article and Find Full Text PDFEnviron Sci Technol
January 2025
Department of Environmental Sciences & Engineering, University of North Carolina, Chapel Hill, North Carolina 27599, United States.
The Gulf States are home to industries emitting styrene, benzene, toluene, ethylbenzene, and xylenes (SBTEX). Presently, adverse health effects of ambient SBTEX exposure in highly polluted regions, such as the Gulf States, must be evaluated. Epidemiologists, however, are limited by inadequate estimates of ambient SBTEX.
View Article and Find Full Text PDFJ Occup Med Toxicol
January 2025
School of Health Sciences, Department of Audiology, University of the Pacific, San Francisco, California, USA.
Background: Hazardous noise exposure is an important health concern in many workplaces and is one of the most common work-related injuries in the United States. Dental professionals are frequently exposed to high levels of occupational noise in their daily work environment. This noise is generated by various dental handpieces such as drills, suctions, and ultrasonic scalers.
View Article and Find Full Text PDFEnviron Monit Assess
January 2025
Institut de Recherche Robert-Sauvé en Santé Et en Sécurité du Travail (IRSST), Montréal, Québec, Canada.
In recyclable waste management facilities, several contaminants, mainly bioaerosols and microorganisms, can be released and cause potential adverse health effects. Given that microbial volatile organic compounds (mVOCs) are metabolites developed by molds and since they can be considered as potential biomarkers of mold exposure, their concentrations in ambient air were monitored at a recyclable waste sorting plant (WSP) and a university campus (UC) serving as control environment for comparison. A recently developed analytical method was used for the detection of 21 selected mVOCs in real conditions.
View Article and Find Full Text PDFJ Hand Ther
January 2025
Neuroscience Center, King Fahad Specialist Hospital, Dammam, Saudi Arabia; King Salman Center for Disability Research, Riyadh, Saudi Arabia.
Background: Hand-arm Vibration Syndrome (HAVS) is a disorder caused by prolonged exposure to hand-held vibrating instruments, commonly observed in industrial contexts such as mining, construction, and manufacturing. It involves symptoms affecting the musculoskeletal, neurological, and vascular systems of the arm and hand.
Purpose: The main aim of this study is to determine the prevalence of HAVS among laborers working in the Khewra salt mines.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!