Purpose: To evaluate the differential sensitivity of choroidal endothelial, retinal pigment epithelial, and retinal ganglion cells to escalating doses of proton beam radiation and to establish a safe dose range for the management of choroidal neovascularization associated with age-related macular degeneration (AMD).
Design: Laboratory investigation.
Methods: Proliferating simian choroidal endothelial cells (RF/6A), differentiated rat retinal ganglion cells (RGC-5), and serum-starved human retinal pigment epithelial cells (ARPE-19) were exposed to 2, 4, 8, and 12 cobalt gray equivalent of proton beam radiation and cell viability was quantified on day 9. Reactive oxygen species levels were analyzed.
Results: Significant decline of choroidal endothelial cell viability was noted as dose escalated from 4 to 8 cobalt gray equivalent with maximum effect observed at 12 cobalt gray equivalent. RGC-5 and ARPE-19 cell count decreased to 95% and 62.7% at 8 cobalt gray equivalent, respectively. Sub-analysis between 4 and 8 cobalt gray equivalent radiation revealed significant decrease in choroidal endothelial cell viability (43.1% at 7 cobalt gray equivalent and 32.3% at 8 cobalt gray equivalent of radiation). Correspondingly, RGC-5 and ARPE-19 cells did not show decrease in cell count or viability. Reactive oxygen species levels significantly increased in radiation-treated choroidal endothelial cells (8.3%-11.9%).
Conclusions: At 6-8 cobalt gray equivalent proton beam radiation, retinal ganglion and retinal pigment epithelial cells are preserved while choroidal endothelial cells are completely inhibited. This dosage offers optimum therapeutic safety window for treatment using proton beam radiation for exudative AMD.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.ajo.2013.04.036 | DOI Listing |
Imaging Sci Dent
December 2024
Department of Oral Diagnosis, Division of Oral Radiology, Piracicaba Dental School, University of Campinas, Piracicaba, SP, Brazil.
Purpose: This study was performed to evaluate the expression of beam hardening artifacts generated by high atomic number materials in stitched cone-beam computed tomography (CBCT) images, compared to the traditional acquisition mode.
Materials And Methods: CBCT volumes were acquired using an acrylic resin phantom embedded with pairs of cylinders made from amalgam dental alloy, cobalt-chromium alloy, gutta-percha, titanium, and zirconium. These cylinders were placed within the overlapping zones of the stitching reconstruction area.
Materials (Basel)
November 2024
College of Arts and Design, Jimei University, Xiamen 361021, China.
This study used statistical tools to optimise WC/Co/Ni welds and model construction to improve the mechanical properties of coatings by laser cladding. The effect of the parameters on the wear performance of the weld was determined by analysis of variance. In addition, a polynomial model was constructed using the response surface method based on the experimental data of the orthogonal array designed by Taguchi.
View Article and Find Full Text PDFWaste Manag
December 2024
School of Management, Tianjin University of Technology, Tianjin 300384, PR China. Electronic address:
Adv Radiat Oncol
October 2024
Department of Radiation Oncology, Apollo Proton Cancer Centre, Chennai, Tamil Nadu, India.
Purpose: To critically review the clinical factors, dosimetry, and their correlation with early outcomes in patients with chordomas and chondrosarcomas treated with pencil beam scanning (PBS) proton beam therapy (PBT).
Methods And Materials: Consecutive 64 patients diagnosed with chordoma or chondrosarcoma treated at our center were studied. Patient, tumor, and treatment-related factors including dosimetry were captured.
Langmuir
September 2024
Van Yuzuncu Yil University, Institute of Natural and Applied Sciences, Department of Chemical Engineering, 65080, Van, Turkey.
The present work is first aimed at recovering graphite from carbon rods of waste zinc-carbon (Zn-C) batteries for applications such as wastewater treatment, in order to contribute to the development of a sustainable environment. Then, a composite material, cobalt-iron layered double hydroxide combination with reduced graphene oxide, and with subsequent Ag nanoparticles deposition via NaBH reduction method (Ag/CoFe-LDH/rGO) was prepared for the catalytic activity of Rhodamine B (RhB) and Safranine-O (SO) as model contaminants from aquatic media. The catalytic activity of RhB and SO by Ag/CoFe-LDH/rGO in the presence of NaBH was studied to model and optimize the process parameters (NaBH amount, reaction time, initial dye concentration (), and catalyst dosage) via central composite design (CCD)-response surface methodology (RSM).
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!