In this work, the aerodynamic performance of beetle wing in free-forward flight was explored by a three-dimensional computational fluid dynamics (CFDs) simulation with measured wing kinematics. It is shown from the CFD results that twist and camber variation, which represent the wing flexibility, are most important when determining the aerodynamic performance. Twisting wing significantly increased the mean lift and camber variation enhanced the mean thrust while the required power was lower than the case when neither was considered. Thus, in a comparison of the power economy among rigid, twisting and flexible models, the flexible model showed the best performance. When the positive effect of wing interaction was added to that of wing flexibility, we found that the elytron created enough lift to support its weight, and the total lift (48.4 mN) generated from the simulation exceeded the gravity force of the beetle (47.5 mN) during forward flight.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4043164 | PMC |
| http://dx.doi.org/10.1098/rsif.2013.0312 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
An optimization procedure of shape and position of the aerodynamic device at the rear side of a semi-trailer truck model.
Heliyon
January 2025
Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia.
The paper outlines the development and optimization of an aerodynamic device for a semi-trailer truck model to reduce aerodynamic drag force. The optimization procedure involves the selection of a basic aerodynamic device shape, using airfoil profiles, and refining its shape and position through established optimization techniques like Full Factorial Design and Response Surface Method within the Design of Experiments framework. The test subject is a 1:10 scale model of the semi-trailer truck.
View Article and Find Full Text PDFEffect of non-spherical shape of dry powder aerosol drugs on their airway deposition distribution.
Int J Pharm
January 2025
HUN-REN Centre for Energy Research, Konkoly Thege M. út, 29-33, 1121 Budapest, Hungary. Electronic address:
In the majority of aerosol drug deposition modelling efforts, the particles are approximated by regular spheres. However, microscope images acquired after drug formulation available in the open literature suggest that their shape is not regular in most cases. This work aimed to combine experimental measurements and numerical simulations to reveal the shape factors of the particles of commercialized aerosol drugs and the effect of non-sphericity on the lung deposition distribution of these drugs.
View Article and Find Full Text PDFModelling Intra-Sinus Fluid Movements and Drainage Through Computational Fluid Dynamics Before and After Maxillary Sinus Augmentation: A Simulation-Based Pilot Study.
J Clin Med
December 2024
Clinic for Masticatory Disorders and Dental Biomaterials, Center for Dental Medicine, University of Zurich, 8006 Zurich, Switzerland.
: Sinus lifting, a procedure to augment bone in the maxilla, may cause complications such as sinusitis due to impaired drainage. This study aimed to assess how sinus lifting impacts airflow in the sinus cavity, which is essential for patients undergoing dental implants. Using computational fluid dynamics (CFD), this research analyzed airflow changes after sinus floor elevation, offering insights into the aerodynamic consequences of the procedure.
View Article and Find Full Text PDFThe Circle Pure Rolling Method for Point Cloud Boundary Extraction.
Sensors (Basel)
December 2024
Facility Design and Instrumentation Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China.
We introduce a circle rolling method (CRM) for boundary extraction from 2D point clouds. The core idea is to create a circle that performs pure rolling on the perimeter of the point cloud to obtain the boundary. For a 3D point cloud, a plane adsorbs points on both sides to create a 2D point cloud, and the CRM is used to extract the boundary points and map them back into space to obtain 3D boundary points.
View Article and Find Full Text PDFInsect-inspired passive wing collision recovery in flapping wing microrobots.
Bioinspir Biomim
January 2025
State Key Laboratory of Robotics, Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China.
Flying insects have developed two distinct adaptive strategies to minimize wing damage during collisions. One strategy includes an elastic joint at the leading edge, which is evident in wasps and beetles, while another strategy features an adaptive and deformable leading edge, as seen in bumblebees and honeybees. Inspired by the latter, a novel approach has been developed for improving collision recovery in micro aerial vehicles (MAVs) by mimicking the principle of stiffness anisotropy present in the leading edges of these insects.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!