We propose an electrically tunable phase shifter for terahertz frequencies. The device is based on a polymer stabilized liquid crystal which allows for a simple device geometry. The polymer stabilized liquid crystal enables continuous tuning of the introduced phase shift with only one pair of electrodes. By characterizing the device with terahertz time-domain spectroscopy we demonstrate a phase shift up to 2.5 terahertz, only slightly changed properties of the neat liquid crystal and significantly reduced response times.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.21.012395 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Buried Interface Modulation Using Self-Assembled Monolayer and Ionic Liquid Hybrids for High-Performance Perovskite and Perovskite/CuInGaSe Tandem Photovoltaics.
Adv Mater
January 2025
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, P. R. China.
Effective modifications for the buried interface between self-assembled monolayers (SAMs) and perovskites are vital for the development of efficient, stable inverted perovskite solar cells (PSCs) and their tandem photovoltaics. Herein, an ionic-liquid-SAM hybrid strategy is developed to synergistically optimize the uniformity of SAMs and the crystallization of perovskites above. Specifically, an ionic liquid of 1-butyl-3-methyl-1H-imidazol-3-iumbis((trifluoromethyl)sulfonyl)amide (BMIMTFSI) is incorporated into the SAM solution, enabling reduced surface roughness, improved wettability, and a more evenly distributed surface potential of the SAM film.
View Article and Find Full Text PDFThermal Actuators Relying on Elastomer-Dispersed Liquid Crystals: From Imines with Supramolecular Chirality and Ferroelectricity to Soft Robots.
ACS Appl Mater Interfaces
January 2025
Department of Inorganic Polymers, "Petru Poni" Institute of Macromolecular Chemistry, Aleea Gr. Ghica Voda 41A, 700487 Iasi, Romania.
The locomotion of various organisms relies on the alternated elongation-contraction of their muscles or bodies. Such biomimicry can offer a promising approach to developing soft robotic devices with improved mobility and efficiency. Most strategies to mimic such motions rely on reversible size modifications of some materials upon exposure to external stimuli.
View Article and Find Full Text PDFInfluence of CO Treatment Pressure on the Chemical Composition and Rheological Properties of Degassed Waxy Crude Oil.
ACS Omega
December 2024
College of Pipeline and Civil Engineering, China University of Petroleum (East China), Qingdao, Shandong 266580, People's Republic of China.
With the gradual application of enhanced oil recovery by CO (CO-EOR), the rheological behavior of produced fluid is altered due to CO dissolution and degassing. This work focuses on the composition, physical properties, gelation and yield characteristics, and viscosity-temperature properties of crude oil containing paraffinic wax after CO treatment. Special attention is given to the effect of the phase state of CO.
View Article and Find Full Text PDFEffect of different post-processing conditions on the accuracy of liquid crystal display-printed orthognathic surgical splints.
Heliyon
January 2025
Division of Oral and Maxillofacial Surgery, Faculty of Dentistry, Thammasat University, Pathum Thani, 12120, Thailand.
Objectives: To evaluate the accuracy (trueness and precision) of liquid crystal display (LCD)-printed orthognathic surgical splints under two different post-processing conditions-rinsing solvent and post-polymerization time.
Materials And Methods: An LCD 3D printer was used to create 48 surgical splints using the same reference standard tessellation language (STL) files. They were randomly assigned to two experimental studies.
Design and evaluation of two proposed hybrid FCC-BCC lattice structures for enhanced mechanical performance.
Heliyon
January 2025
Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran.
Lattice structures are an innovative solution to increase the strength-to-weight ratio of a structure. In this study, two polymeric hybrid lattice structures-"FRB" (a heterogenous structure which is indeed a BCC structure reinforced by FCC unit cells dispersed in a way to form a chessboard pattern in each layer) and the "Multifunctional" (a homogenous structure whose unit cells are a combination of FCC and BCC unit cells where their central nodes are connected)-are proposed, fabricated via liquid crystal display 3D printing technique, and their mechanical characteristics are evaluated under quasi-static loading, experimentally and numerically. The results indicate a 15.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!