Concerning polymeric monolithic materials utilized in separation science, the structural and mechanical characteristics from the nanoscopic to the macroscopic scale remain of great interest. Suitable analytical tools are urgently required to understand the polymer monolith's constituent structure, particularly in the case of nanoscale polymer properties that tend to develop gel porosity in contact with a mobile phase ultimately affecting the chromatographic performance. Herein described are our first findings from a characterization of commercially available analytical polymer monoliths based on styrene/divinylbenzene and methacrylate chemistries utilizing confocal Raman spectroscopy imaging and atomic force microscopy (AFM). Confocal Raman spectroscopy can be used to generate a three-dimensional representation of monoliths in both dry state and in contact with solvent. AFM force-indentation measurements on individual cross-sectioned globular features permit detailed assessment of mechanical properties of the stationary phase. This approach allowed so far unprecedented insight and identification of a heterogeneous cross-link density distribution of polymer material within individual globular features on a submicrometer scale.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/ac401303k | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
An innovative semiconducting Ni(II)-metallogel based robust random access memory (RRAM) device for advanced flexible electronics applications.
Sci Rep
December 2024
Department of Physics, Indian Institute of Technology, Patna, 801106, Bihar, India.
A highly effective method for creating a supramolecular metallogel of Ni(II) ions (NiA-TA) has been developed in our work. This approach uses benzene-1,3,5-tricarboxylic acid as a low molecular weight gelator (LMWG) in DMF solvent. Rheological studies assessed the mechanical properties of the Ni(II)-metallogel, revealing its angular frequency response and thixotropic behaviour.
View Article and Find Full Text PDFStrength and Poisson's ratio of fused filament fabrication parts made from carbon filler enhanced PEEK compounds at elevated temperatures.
Sci Rep
December 2024
School of Electrical Engineering, Aalto University, P.O. Box 15500, Aalto, FI-00076, Finland.
Engineering plastics are finding widespread applications across a broad temperature spectrum, with additive manufacturing (AM) having now become commonplace for producing aerospace-grade components from polymers. However, there is limited data available on the behavior of plastic AM parts exposed to elevated temperatures. This study focuses on investigating the tensile strength, tensile modulus and Poisson's ratio of parts manufactured using fused filament fabrication (FFF) and polyetheretherketone (PEEK) plastics doped with two additives: short carbon fibers (SCFs) and multi-wall carbon nanotubes (MWCNTs).
View Article and Find Full Text PDFEnhanced mechanical properties of alkali-activated dolomite dust emulsified asphalt composites.
Sci Rep
December 2024
School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan, China.
The dolomite dust-emulsified asphalt composite (DAC) with excellent mechanical properties was successfully prepared using alkali activation. The effects of different alkali concentrations and emulsified asphalt contents on the mechanical properties of the materials were studied. And the micro-mechanisms of its mechanical performance changes were analyzed through SEM and XRD characterization.
View Article and Find Full Text PDFImpact of plasma discharge pressure on implant surface properties and osteoblast activities in vacuum-assisted plasma treatment.
Sci Rep
December 2024
Department of Mechanical Engineering, Sejong University, Seoul, Republic of Korea.
Nonthermal plasma has been extensively utilized in various biomedical fields, including surface engineering of medical implants to enhance their biocompatibility and osseointegration. To ensure robustness and cost effectiveness for commercial viability, stable and effective plasma is required, which can be achieved by reducing gas pressure in a controlled volume. Here, we explored the impact of reduced gas pressure on plasma properties, surface characteristics of plasma-treated implants, and subsequent biological outcomes.
View Article and Find Full Text PDFElucidating governing factors of PFAS removal by polyamide membranes using machine learning and molecular simulations.
Nat Commun
December 2024
School of Civil & Environmental Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
Per- and polyfluoroalkyl substances (PFASs) have recently garnered considerable concerns regarding their impacts on human and ecological health. Despite the important roles of polyamide membranes in remediating PFASs-contaminated water, the governing factors influencing PFAS transport across these membranes remain elusive. In this study, we investigate PFAS rejection by polyamide membranes using two machine learning (ML) models, namely XGBoost and multimodal transformer models.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!