The effect of thermal pretreatment on two-phase olive mill solid waste was evaluated by chemical oxygen demand solubilisation and biochemical methane potential (BMP) tests. Temperatures of 100, 120, 160 and 180°C were applied during 60, 120 and 180 min for each temperature studied. The highest chemical oxygen demand solubilisation after pretreatment (42%) was found for 120 and 180°C during 180 min in both cases. These two conditions were selected for the BMP tests. BMP tests showed two different stages: a first exponential stage and a sigmoidal zone after a lag period. No influence of the pretreatment was observed on the kinetic constant of the first-stage. Clear difference was observed in the maximum methane production rate of the second stage, 76.8 mL CH4/(g VS day) was achieved after pretreatment at 180°C (180 min), value 22% and 40% higher than that obtained for the untreated and pretreated OMSW at 120°C, respectively.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.biortech.2013.04.090 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Optimizing laboratory medication safety monitoring in patients with juvenile idiopathic arthritis to advance value-based care.
Clin Rheumatol
January 2025
Children's Mercy Kansas City, Kansas City, MO, USA.
Introduction/objectives: Most children with juvenile idiopathic arthritis (JIA) are treated with medications that require safety monitoring labs. Recommended testing includes a creatinine level. However, 87.
View Article and Find Full Text PDF[Healing of Critical-Size Bone Defects with Tricalcium Phosphate Hydrogel: Evaluation of Hydrogel as a Scaffold for Stem Cells and BMP-2].
Acta Chir Orthop Traumatol Cech
January 2025
Ortopedická klinika, Fakultní nemocnice Hradec Králové.
Purpose Of The Study: The preclinical study aimed to compare the healing of segmental bone defects treated with biodegradable hyaluronic acid and tricalcium phosphate-based hydrogel with the established autologous spongioplasty. Another aim was to evaluate the hydrogel as a scaffold for osteoinductive growth factor of bone morphogenetic protein-2 (BMP-2) and stem cells.
Material And Methods: The study was conducted in an in vivo animal model.
Antisolvent 3D Printing of Gene-Activated Scaffolds for Bone Regeneration.
Int J Mol Sci
December 2024
Central Research Institute of Dentistry and Maxillofacial Surgery, 119021 Moscow, Russia.
The use of 3D-printed gene-activated bone grafts represents a highly promising approach in the fields of dentistry and orthopedics. Bioresorbable poly-lactic-co-glycolic acid (PLGA) scaffolds, infused with adenoviral constructs that carry osteoinductive factor genes, may provide an effective alternative to existing bone grafts for the reconstruction of extensive bone defects. This study aims to develop and investigate the properties of 3D scaffolds composed of PLGA and adenoviral constructs carrying the BMP2 gene (Ad-BMP2), both in vitro and in vivo.
View Article and Find Full Text PDFNanoparticles for the Delivery of Pro-regenerative Cardiac Progenitor Secretory Proteins Targeting Cellular Senescence and Vasculogenesis.
ACS Appl Bio Mater
January 2025
Institute of Biomedical Engineering, University of Toronto, 164 College Street, Toronto, Ontario M5S 3E2, Canada.
Contemporary therapies following heart failure center on regenerative approaches to account for the loss of cardiomyocytes and limited regenerative capacity of the adult heart. While the delivery of cardiac progenitor cells has been shown to improve cardiac function and repair following injury, recent evidence has suggested that their paracrine effects (or secretome) provides a significant contribution towards modulating regeneration, rather than the progenitor cells intrinsically. The direct delivery of secretory biomolecules, however, remains a challenge due to their lack of stability and tissue retention, limiting their prolonged therapeutic efficacy.
View Article and Find Full Text PDFEffects of inoculum temperature and characteristics on cellulose and sewage sludge biodegradability: A comparative study of three inocula.
Chemosphere
January 2025
BioEngine Research team on green process Engineering and Biorefineries, Chemical Engineering Department, Université Laval, Pavillon Adrien-Pouliot 1065, av. de la Médecine Québec, Québec, Canada; CentrEau, Centre de Recherche sur l'eau, Université Laval, 1065 Avenue de la Médecine, Québec, QC, G1V 0A6, Canada. Electronic address:
The role of inoculum in initiating anaerobic digestion (AD), and accelerating the start-up of anaerobic digesters has been well-documented. However, the effect of aligning the origin temperature of the inoculum with the operational temperature of the new digester remains underexplored. This study investigates how the origin temperature and characteristics of the inoculum affect the kinetics and biodegradability of sewage sludge (SS) and microcrystalline cellulose (MCC) under mesophilic and thermophilic conditions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!