Magnetron sputtering was used to produce nanocomposite TiN and TiN/Ag coatings on stainless steel surfaces. The surface chemistry (EDX), physicochemical properties (contact angles), topography and roughness parameters (WLP and AFM) of the fine polished stainless steel (FPSS), TiN and TiN/8.6 at.% Ag surfaces were examined. Real-time initial adhesion of two Listeria monocytogenes strains (EGDe and 64) to the three surfaces was determined under flow conditions, and their attachment strength after adhesion was measured using atomic force microscopy (AFM). The anti-listerial properties of the surfaces were determined using LIVE/DEAD staining. Our results demonstrate that FPSS, TiN and TiN/8.6 at.% Ag possessed different surface properties, which may influence both attachment strength and anti-listerial properties. There were no significant (p>0.05) differences in the initial adhesion of the two L. monocytogenes strains to the three different surfaces. Attachment studies showed that the two L. monocytogenes strains did not attach to FPSS under wetted conditions. However, both strains attached to TiN and TiN/8.6 at.% Ag surfaces, although with less strength to TiN/8.6 at.% Ag than to TiN surfaces. The TiN/8.6 at.% Ag surface showed marked anti-listerial properties as compared with FPSS and TiN. Initial adhesion, attachment strength and anti-listerial properties were found to be strain dependent.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.colsurfb.2013.03.044 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Single-isomer bis(pyrrolidino)fullerenes as electron-transporting materials for tin halide perovskite solar cells.
Chem Sci
December 2024
Institute for Chemical Research, Kyoto University Gokasho, Uji Kyoto 611-0011 Japan
Although fullerene bisadducts are promising electron-transporting materials for tin halide perovskite solar cells, they are generally synthesized as a mixture of isomeric products that require a complicated separation process. Here, we introduce a phenylene-bridged bis(pyrrolidino)fullerene, Bis-PC, which forms only a single isomer due to geometrical restriction. When used in a tin perovskite solar cell with a PEAFASnI (PEA: phenylethylammonium and FA: formamidinium) light absorption layer, the resulting open-circuit voltage ( ) was 0.
View Article and Find Full Text PDFSpatially Isomeric Fulleropyrrolidines Enable Controlled Stacking of Perovskite Colloids for High-Performance Tin-Based Perovskite Solar Cells.
Angew Chem Int Ed Engl
January 2025
Xiamen Key Laboratory of Optoelectronic Materials and Advanced Manufacturing, Institute of Luminescent Materials and Information Displays, College of Materials Science and Engineering, Huaqiao University, Xiamen, 361021, China.
The advancement of tin-based perovskite solar cells (TPSCs) has been severely hindered by the poor controllability of perovskite crystal growth and the energy level mismatch between the perovskite and fullerene-based electron transport layer (ETL). Here, we synthesized three cis-configured pyridyl-substituted fulleropyrrolidines (PPF), specifically 2-pyridyl (PPF2), 3-pyridyl (PPF3), and 4-pyridyl (PPF4), and utilized them as precursor additives to regulate the crystallization kinetics during film formation. The spatial distance between the two pyridine groups in PPF2, PPF3, and PPF4 increases sequentially, enabling PPF4 to interact with more perovskite colloidal particles.
View Article and Find Full Text PDFMuscle Metabolism During Multiple Muscle Stimulation Using an Affordable Equipment.
J Funct Morphol Kinesiol
November 2024
Department of Kinesiology, University of Georgia, Athens, GA 30602, USA.
: Previous studies have shown that neuromuscular electrical stimulation (NMES), while expensive, can provide some of the health benefits of exercise to people who cannot exercise their legs normally. The aim of this study was to quantify the increases in muscle metabolism in four muscles of the legs of able-bodied individuals with NMES. : Healthy college-aged students were tested.
View Article and Find Full Text PDFBithiophene Imide-Based Self-Assembled Monolayers (SAMs) on NiOx for High-Performance Tin Perovskite Solar Cells Fabricated Using a Two-Step Approach.
ACS Appl Mater Interfaces
January 2025
Department of Applied Chemistry and Institute of Molecular Science, National Yang Ming Chiao Tung University, 1001 Ta-Hseuh Road, Hsinchu 300093, Taiwan.
Three new bithiophene imide (BTI)-based organic small molecules, (), (), and (), with varied alkyl side chains, were developed and employed as self-assembled monolayers (SAMs) applied to NiOx films in tin perovskite solar cells (TPSCs). The NiOx layer has the effect of modifying the hydrophilicity and the surface roughness of ITO for SAM to uniformly deposit on it. The side chains of the SAM molecules play a vital role in the formation of a high-quality perovskite layer in TPSCs.
View Article and Find Full Text PDFBEOL Three-Dimensional Stackable Oxide Semiconductor CMOS Inverter with a High Voltage Gain of 233 at Cryogenic Temperatures.
Nano Lett
December 2024
Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576.
Targeting high-performance computing at cryogenic temperatures, we report back-end-of-line (BEOL)-compatible p-type Te-TeO field effect transistors (FETs) deposited using a sputtering method that is cost-effective, large-scale manufacturable, and highly controllable. Combined with the indium tin oxide channel n-FETs employing a common gate and HfO gate dielectric, BEOL three-dimensional stackable oxide semiconductor complementary metal oxide semiconductor (CMOS) inverters were further realized, demonstrating excellent threshold voltage matching, with a high voltage gain of 132 with a 2 V supply voltage () at room temperature. At cryogenic temperatures, the CMOS inverter exhibits significantly enhanced performance, achieving a voltage gain of 233 at a of 2 V with a wide noise margin of 86%.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!