Background: Surgical trainees develop surgical skills using various techniques, with simulators providing a safe learning environment. Fracture fixation is the most common procedure in orthopaedic surgery, and residents may benefit from simulated fracture fixation. The performance of residents on a virtual simulator that allows them to practice the surgical fixation of fractures by providing a sense of touch (haptics) has not yet been compared with their performance using other methods of practicing fracture fixation, such as a Sawbones simulator model. The purpose of this study was to assess whether residents performed similarly on a newly developed virtual simulator compared with a Sawbones simulator fracture fixation model.
Methods: A stratified, randomized controlled study involving twenty-two orthopaedic surgery residents was performed. The residents were randomized to first perform surgical fixation of the ulna on either the virtual or the Sawbones simulator, after which they performed the same procedure on the other simulator. Their performance was evaluated by examiners experienced in fracture fixation who completed a task-specific checklist, global rating scale (GRS) form, and time-to-completion record for each participant on each simulator.
Results: Both simulators distinguished between differing experience levels, demonstrating construct validity; for the Sawbones simulator, the Cohen d value (effect size) was >0.90, and for the virtual simulator, d was >1.10 (p < 0.05 for both). The participants achieved significantly better scores on the virtual simulator compared with the Sawbones simulator (p < 0.05) for all measures except time to completion. The GRS scores showed a high level of internal consistency (Cronbach α, >0.80). However, Pearson product-moment correlation analysis showed no significant correlations between the results on the two simulators; therefore, concurrent validity was not achieved.
Conclusions: The newly developed virtual ulnar surgical fixation simulator, which incorporates haptics, shows promise for helping surgical trainees learn and practice basic skills, but it did not attain the same standards as the current standard Sawbones simulator. The procedural measures used to assess resident performance demonstrated good reliability and validity, and both the Sawbones and the virtual simulator showed evidence of construct validity.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.2106/JBJS.K.01284 | DOI Listing |
Biomed Phys Eng Express
December 2024
School of Medicine, National and Kapodistrian University of Athens, GR11527, Athens, Greece.
. Open reduction internal fixation (ORIF) and external fixation are traditional surgical techniques for treating type VI Schatzker tibial plateau fractures. A newly developed technique integrates the intramedullary tibial nail with condylar bolts.
View Article and Find Full Text PDFFoot Ankle Spec
October 2024
Enovis Foot & Ankle, Atlanta, Georgia.
BMC Musculoskelet Disord
September 2024
Department of Orthopaedic Surgery, Brigham and Women's Hospital, 75 Francis St, Boston, MA, 02115, USA.
Background: Control of humeral torsion can present a challenge, especially intraoperatively during closed reduction and fixation of humeral shaft fractures or 2-part surgical neck fractures of the proximal humerus. The objective of this study is to develop and validate an indirect method for the assessment of humeral torsion using an index that is linearly correlated with rotational arm position and can be derived from only a single plain radiographic image of the proximal humerus.
Methods: The Humeral Head Offset Index (HHOI) is calculated as the ratio of the medial and lateral offset of the humeral head measured from the outer cortices of the shaft on a plain radiographic or fluoroscopic image.
Bioengineering (Basel)
July 2024
Department of Biomedical Engineering, I-Shou University, Kaohsiung City 82445, Taiwan.
The open reduction of mandibular condyle neck fractures is difficult due to the limited surgical field and complex facial nerve structures. The most effective fixation method for narrow fractured segments is debated as standard double four-hole plate fixation is often not feasible. This research compared bone stability and force resistance between single-long-plate and double-short-plate fixations using clinical outcomes, a Sawbones mandible model, and finite element analysis.
View Article and Find Full Text PDFJ Clin Orthop Trauma
June 2024
University of Alabama Birmingham Department of Orthopaedics, Birmingham, AL, United States.
Introduction: Distal fibula osteoporotic comminuted fractures are challenging to treat and are often treated with periarticular locking plates. This study examined the biomechanical difference between locked plating and dual non-locked one-third tubular plating.
Methods: Using an osteoporotic Sawbones fibula model, simulated fracture were fixated with one-third tubular dual plating and locked periarticular plating.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!