In this study, preparation and characterization of soft crosslinked gelatin sponge for blood hemostasis application was considered. The effects of gelatin and crosslinker concentrations and altering freeze-drying temperature on sponges' density and structure, water absorption ability and biodegradation, cytotoxicity, mechanical properties and hemostatic effect were investigated. The density measurement indicated that the density of freeze-dried sponges increased when the freezing temperature was lowered. Scanning electron microscope and optical microscope images showed that gelatin sponges had uniform small pores (60 μm) after freezing at liquid nitrogen (-196°C). Biodegradation study demonstrated that the crosslinked sponges containing 1% and 2% gelatin lost respectively nearly 40 to 70% of their weight during 24 h. Prepared sponges showed desired water absorption ability (30-40 times of own dry weight) improved by lowering glutaraldehyde concentration. Cell toxicity was not detected in any of the samples. Compression modulus of sponges decreased four times (160 to 40 kPa) as the gelatin content varied from 2 to 1% w/v. Hemostasis study confirmed that the hemolytic ability of sponges increased through raising gelatin content and porosity of sponge. We suggest using gelatin sponges containing 1% w/v gelatin, 0.5% w/v glutaraldehyde frozen in liquid nitrogen, as a potential substitution for local hemostat absorbable sponge.

Download full-text PDF

Source
http://dx.doi.org/10.3233/BME-130745DOI Listing

Publication Analysis

Top Keywords

gelatin
9
crosslinked gelatin
8
local hemostat
8
water absorption
8
absorption ability
8
sponges increased
8
gelatin sponges
8
liquid nitrogen
8
gelatin content
8
sponges
7

Similar Publications

Synthesis and characteristics of type 3 resistant waxy corn starch by removal of starch granule surface proteins and heat-moisture treatment.

Food Chem

January 2025

Engineering Research Center of Bio-process, Ministry of Education, Hefei University of Technology, 193 Tunxi Road, Hefei, Anhui 230009, PR China; School of Food Science and Engineering, Hefei University of Technology, Hefei, Anhui 230009, PR China.

The type 3 resistant waxy corn starch (RS3) was synthesized by removing starch granule surface proteins and subjecting it to heat-moisture treatment at -20°C, 4°C, and 25°C. Upon applying the dual modification, a significant reduction in particle size and in vitro digestion was observed, while the gelatinization enthalpy, relative crystallinity, and resistant starch content increased. Notably, RS3 treated at 4°C demonstrated the lowest digestion rate of 3.

View Article and Find Full Text PDF

Microbubble-assisted starch modification (MASM) using different gases (N, CO and air) was employed to assess the effects of hydrodynamic cavitation (HC) on various botanical starches, including potato, wheat, corn and rice. SEM showed that N- and CO- microbubbles created more pronounced holes and cracks on the starch surfaces than air-microbubbles. The hydrodynamic cavitation-assisted microbubble (HCAM) treatment significantly reduced the amorphous and crystalline structures in potato and wheat starches, with less impact observed in corn and rice.

View Article and Find Full Text PDF

Effect of Ultrasound Treatment on Structural and Physical Properties of Native Maize Starch.

Plant Foods Hum Nutr

January 2025

Instituto de Ciencia y Tecnología de Alimentos Córdoba (ICYTAC) - CONICET-UNC, Av. Juan Filloy S/N, Ciudad Universitaria, Córdoba, Argentina.

The focus of this work was to evaluate the differences between the thermal and mechanical effects generated by ultrasound waves on the properties of corn starch, which facilitate the subsequent enzymatic hydrolysis for the generation of porous starches. The results showed that both the thermal and mechanical effects have the capacity to disorganize/alter the structure of starch, impacting on its properties. Characteristics such as particle size, pasting and thermal properties (peak viscosity 1400-1800 cp.

View Article and Find Full Text PDF

Bioaugmented design and functional evaluation of low damage implantable array electrodes.

Bioact Mater

May 2025

State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, China.

Implantable neural electrodes are key components of brain-computer interfaces (BCI), but the mismatch in mechanical and biological properties between electrode materials and brain tissue can lead to foreign body reactions and glial scarring, and subsequently compromise the long-term stability of electrical signal transmission. In this study, we proposed a new concept for the design and bioaugmentation of implantable electrodes (bio-array electrodes) featuring a heterogeneous gradient structure. Different composite polyaniline-gelatin-alginate based conductive hydrogel formulations were developed for electrode surface coating.

View Article and Find Full Text PDF

Natural hydrogels have garnered increasing attention due to their natural origins and beneficial roles in wound healing. Hydrogel water-retaining capacity and excellent biocompatibility create an ideal moist environment for wound healing, thereby enhancing cell proliferation and tissue regeneration. For this reason, naturally derived hydrogels formulated from biomaterials such as chitosan, alginate, gelatin, and fibroin are highly promising due to their biodegradability and low immunogenic responses.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!