The Zn (II) adsorption capacity of lignite and coconut shell-based activated carbon fiber (ACF) was evaluated as a function of initial Zn (II) concentration, temperature and contact time in batch adsorption process in this study. Adsorption uptake increased with initial Zn (II) concentration and temperature. Optimal contact time for the adsorption of Zn (II) ions onto lignite and coconut shell-based ACF was found to be 50 min. Removal percentage decreased from 88.0% to 78.54% with the increment in initial Zn (II) concentration from 5 to 50 mg L(-1). Equilibrium data fit well with Langmuir-I isotherm indicating homogeneous monolayer coverage of Zn (II) ions on the adsorbent surface. Maximum monolayer adsorption capacity of Zn (II) ions on ACF was found to be 9.43 mg g(-1). Surface morphology and functionality of ACF prior to and after adsorption were characterized by electron microscopy and infrared spectroscopy. Various thermodynamic parameters such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) were evaluated.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.chemosphere.2013.02.068DOI Listing

Publication Analysis

Top Keywords

lignite coconut
12
coconut shell-based
12
initial concentration
12
shell-based activated
8
activated carbon
8
carbon fiber
8
adsorption capacity
8
concentration temperature
8
contact time
8
adsorption
7

Similar Publications

Carbon-based electrodes have recently been most widely used in P-MFC due to their desirable properties such as biocompatibility, chemical stability, affordable price, corrosion resistance, and ease of regeneration. In general, carbon-based electrodes, particularly graphite, are produced using a complex process based on petroleum derivatives at very high temperatures. This study aims to produce electrodes from bio-pitch and charcoal powder as an alternative to graphite electrodes.

View Article and Find Full Text PDF

Effect of modified Ca-Al adsorbents on heavy metal fixation during co-combustion of coal and coconut shells: Experiments and simulations.

Environ Pollut

November 2024

School of Electric Power, South China University of Technology, 510640, Guangzhou, China; Guangdong Province Key Laboratory of Efficient and Clean Energy Utilization, 510640, Guangzhou, China.

As an alternative fuel, bio-waste coconut shells have shown promise in reducing pollution during the co-combustion process. In this study, a novel metal-mineral adsorbent, Ca-Al (CaAlO), was prepared and physically (ultrasonic) and chemically (ethylene glycol) modified to enhance its adsorption properties. Thermal adsorption experiments investigated the effect of the adsorbents on the fixation of six heavy metals (HMs): Cr, Cu, Mn, Ni, Pb, and Zn.

View Article and Find Full Text PDF

Background: This study compares propellant fuels' specific thrust and impulse parameters using nanocarbon variant fuels from coconut shells and coal. Specific impulses and impulses are essential parameters that determine rocket performance. The specific thrust and impulses are influenced by fuel type, material composition, heat flow, and burning time parameters.

View Article and Find Full Text PDF

Carbon-based brilliance: a novel approach to renewable energy in radiotherapy centers.

Radiat Prot Dosimetry

July 2024

Department of Radiotherapy & Radiation Medicine, Institute of Medical Sciences, Banaras Hindu University, Varanasi 221005, India.

The energy produced from other sources which does neither come from fossil fuels nor contribute in the production of any greenhouse effects that causes climate changes is called as 'Alternative Energy'. Since our world's primary energy sources such as coal, oil and natural gases are exploited to a greater extent, we are in an urge to switch to an alternative energy. Scattered radiation, a common byproduct in radiation therapy and diagnostic radiology, presents a unique opportunity in the realm of alternative energy.

View Article and Find Full Text PDF

The treatment of raw foul air that could escape to the atmosphere from the head space of the incoming wastewater sewer lines into a Southern California Water Resource Recovery Facility was evaluated by using a 1/20th scale pilot unit consisting of three different granular activated carbon filter technologies, operating side by side, under similar operating conditions, each having an average 3.8-s contact time. The three activated carbon filters contained each 0.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!