Background: The effects of a tin filter on virtual non-enhanced (VNE) images created by dual-energy CT have not been well evaluated.
Purpose: To compare the accuracy of VNE images between those with and without a tin filter.
Material And Methods: Two different types of columnar phantoms made of agarose gel were evaluated. Phantom A contained various concentrations of iodine (4.5-1590 HU at 120 kVp). Phantom B consisted of a central component (0, 10, 25, and 40 mgI/cm(3)) and a surrounding component (0, 50, 100, and 200 mgI/cm(3)) with variable iodine concentration. They were scanned by dual-source CT in conventional single-energy mode and dual-energy mode with and without a tin filter. CT values on each gel at the corresponding points were measured and the accuracy of iodine removal was evaluated.
Results: On VNE images, the CT number of the gel of Phantom A fell within the range between -15 and +15 HU under 626 and 881 HU at single-energy 120 kVp with and without a tin filter, respectively. With attenuation over these thresholds, iodine concentration of gels was underestimated with the tin filter but overestimated without it. For Phantom B, the mean CT numbers on VNE images in the central gel component surrounded by the gel with iodine concentrations of 0, 50, 100, and 200 mgI/cm(3) were in the range of -19-+6 HU and 21-100 HU with and without the tin filter, respectively.
Conclusion: Both with and without a tin filter, iodine removal was accurate under a threshold of iodine concentration. Although a surrounding structure with higher attenuation decreased the accuracy, a tin filter improved the margin of error.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1177/0284185113485068 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Automated system for calving time prediction and cattle classification utilizing trajectory data and movement features.
Sci Rep
January 2025
Center for Animal Disease Control, University of Miyazaki, Miyazaki, 889-2192, Japan.
Accurately predicting the calving time in cattle is essential for optimizing livestock management and ensuring animal welfare. Our research focuses on developing a robust system for calving cattle classification and calving time prediction, utilizing 12-h trajectory data for 20 cattle. Our system classifies cattle as abnormal (requiring human assistance) or normal (not requiring assistance) and predicts calving times based on their individual behaviors.
View Article and Find Full Text PDFSynergistic Improvement of Narrow Bandgap PbS Quantum Dot Solar Cells through Surface Ligand Engineering, Near-Infrared Spectral Matching, and Enhanced Electrode Transparency.
ACS Appl Mater Interfaces
January 2025
CSIR-National Chemical Laboratory, Dr. Homi Bhabha Road, Pune 411008, India.
The tunability of the energy bandgap in the near-infrared (NIR) range uniquely positions colloidal lead sulfide (PbS) quantum dots (QDs) as a versatile material to enhance the performance of existing perovskite and silicon solar cells in tandem architectures. The desired narrow bandgap (NBG) PbS QDs exhibit polar (111) and nonpolar (100) terminal facets, making effective surface passivation through ligand engineering highly challenging. Despite recent breakthroughs in surface ligand engineering, NBG PbS QDs suffer from uncontrolled agglomeration in solid films, leading to increased energy disorder and trap formation.
View Article and Find Full Text PDFUtilizing Solvent Repulsion between Dimethylformamide and Isopropanol to Manipulate Sn Distribution for Bifacial CuZnSn(S,Se) Solar Cells.
ACS Appl Energy Mater
December 2024
School of Chemistry, University of Bristol, Cantocks Close, BS8 1TS Bristol, U.K.
Rationalizing the role of chemical interactions in the precursor solutions on the structure, morphology, and performance of thin-film CuZnSn(S,Se) (CZTSSe) is key for the development of bifacial and other photovoltaic (PV) device architectures designed by scalable solution-based methods. In this study, we uncover the impact of dimethylformamide (DMF) and isopropanol (IPA) solvent mixtures on cation complexation and rheology of the precursor solution, as well as the corresponding morphology, composition, and PV performance of CZTSSe thin-film grown on fluorine-doped tin oxide (FTO). We find that increasing the proportion of IPA leads to a nonlinear increase in dynamic viscosity due to the strong repulsion between DMF and IPA, which is characterized by an interaction cohesion parameter of 3.
View Article and Find Full Text PDFEvaluation of ultra-low-dose CT with tin filter for craniosynostosis.
J Med Imaging Radiat Oncol
November 2024
Department of Radiology, Children's Hospital Westmead, Sydney, New South Wales, Australia.
Introduction: CT has replaced skull radiography as the gold standard for assessment of craniosynostosis in children. To minimise the risks of ionising radiation in this radiosensitive population, low-dose CT protocols are increasingly being adopted. This study evaluates the effectiveness of an ultra-low-dose CT protocol with a tin filter in reducing radiation exposure whilst maintaining diagnostic quality for craniosynostosis, and its utility in the evaluation of other findings not appreciable on skull radiography.
View Article and Find Full Text PDFCT radiation dose reduction with tin filter for localisation/characterisation level image quality in PET-CT: a phantom study.
EJNMMI Phys
November 2024
Department of Nuclear Medicine, Lillebaelt University Hospital, Beriderbakken 4, Vejle, 7100, Denmark.
Background: The tin filter has allowed radiation dose reduction in some standalone diagnostic computed tomography (CT) applications. Yet, 'low-dose' CT scans are commonly used in positron emission tomography (PET)-CT for lesion localisation/characterisation (L/C), with higher noise tolerated. Thus, dose reductions permissible with the tin filter at this image quality level may differ.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!