An in vitro study was conducted to quantitatively measure the depth of root surface removal using curettes of standardized sharpness and with definite stroke number. Extracted periodontally healthy teeth from patients 10 to 15, 16 to 25, and 26 to 40 years old had periodontal ligament remnants removed with dry gauze before being secured in a vertical position during root planing. The force applied to the root surface was measured with a tension load cell. The "bright line" test was used to assess curette sharpness. After histologic processing, the thickness of cementum adjacent to the root defect, the cementum (if any) in the root defect, total amount of cementum removed, and depth of root defect were measured by a microscopic ocular grid. Teeth from each age range were evenly distributed into 6 groups of 10 teeth each. In the majority of teeth from the 20 stroke group through the 70 stroke group, complete cementum removal was observed at the site of planing. However, in some sections from each group, fragments of cementum remained on the root surface. A positive relationship (r/s = 1) was found between the number of strokes and the force applied to the root surface and the mean depth of defect (P less than 0.05). However, an inverse relationship existed between mean force per stroke and mean defect depth (r/s = -.99) such that as mean force per stroke increased, the mean defect depth decreased. As the root surface became smoother with an increasing number of strokes, the forces increased and were more consistent.(ABSTRACT TRUNCATED AT 250 WORDS)

Download full-text PDF

Source
http://dx.doi.org/10.1902/jop.1990.61.5.293DOI Listing

Publication Analysis

Top Keywords

root surface
20
root defect
12
root
9
cementum removal
8
depth root
8
force applied
8
applied root
8
stroke group
8
number strokes
8
force stroke
8

Similar Publications

Mid-Infrared High-Power InGaAsSb/AlGaInAsSb Multiple-Quantum-Well Laser Diodes Around 2.9 μm.

Nanomaterials (Basel)

January 2025

Key Laboratory of Optoelectronic Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China.

Antimonide laser diodes, with their high performance above room temperature, exhibit significant potential for widespread applications in the mid-infrared spectral region. However, the laser's performance significantly degrades as the emission wavelength increases, primarily due to severe quantum-well hole leakage and significant non-radiative recombination. In this paper, we put up an active region with a high valence band offset and excellent crystalline quality with high luminescence to improve the laser's performance.

View Article and Find Full Text PDF

The aim of this study was to investigate the effects of retro-cavity preconditioning with or without 17% ethylenediaminetetraacetic acid (EDTA) solution on root surface pH as well as dislodgement resistance of NeoMTA2 and MTA Flow retro-fills. Forty-eight single-rooted human incisors were selected. After completion of endodontic treatment, root-end resections were performed, and retro-cavities were prepared.

View Article and Find Full Text PDF

Fracture resistances of heat-treated nickel-titanium files used for minimally invasive instrumentation.

BMC Oral Health

January 2025

Department of Conservative Dentistry, School of Dentistry, Dental Research Institute, Dental and Life Science Institute, Pusan National University, Yangsan, Korea.

Background: This study compared the torsional resistance, bending stiffness, and cyclic fatigue resistances of different heat-treated NiTi files for minimally invasive instrumentation.

Methods: TruNatomy (TN) and EndoRoad (ER) file systems were compared with ProTaper Gold (PG). Torsional load, distortion angle, and bending stiffness were assessed using a custom device AEndoS, and toughness was calculated using the torsional data.

View Article and Find Full Text PDF

This study focused on simulating the adsorption-based separation of Methylene Blue (MB) dye utilising Oryza sativa straw biomass (OSSB). Three distinct modelling approaches were employed: artificial neural networks (ANN), adaptive neuro-fuzzy inference systems (ANFIS), and response surface methodology (RSM). To evaluate the adsorbent's potential, assessments were conducted using Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM).

View Article and Find Full Text PDF

Qualitative and Quantitative Analyses of 1-Aminocyclopropane-1-carboxylic Acid Concentrations in Plants Organs Using Phenyl Isothiocyanate Derivatization.

J Agric Food Chem

January 2025

Engineering Research Center of Protection and Utilization of Plant Resources, College of Bioscience and Biotechnology, Shenyang Agricultural University, Shenyang, Liaoning Province 110866, China.

1-Aminocyclopropane-1-carboxylic acid (ACC) is a direct precursor of phytohormone ethylene. We used a phenyl isothiocyanate (PITC) derivatization modification method combined with spectrographic analysis to isolate and identify three products of the derivatization reactions of ACC and PITC. The MRM mode of UPLC-MS/MS was used to establish the analysis of 6-phenyl-5-thioxo-4,6-diazaspiro[2.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!