Background: This study compares the influence of two different types of magnification (magnifier versus large print) on crowded near vision task performance.
Methods: Fifty-eight visually impaired children aged 4-8 years participated. Participants were divided in two groups, matched on age and near visual acuity (NVA): [1] the magnifier group (4-6 year olds [n = 13] and 7-8 year olds [n = 19]), and [2] the large print group (4-6 year olds [n = 12] and 7-8 year olds [n = 14]). At baseline, single and crowded Landolt C acuity were measured at 40 cm without magnification. Crowded near vision was measured again with magnification. A 90 mm diameter dome magnifier was chosen to avoid measuring the confounding effect of navigational skills. The magnifier provided 1.7× magnification and the large print provided 1.8× magnification. Performance measures: [1] NVA without magnification at 40 cm, [2] near vision with magnification, and [3] response time. Working distance was monitored.
Results: There was no difference in performance between the two types of magnification for the 4-6 year olds and the 7-8 year olds (p's = .291 and .246, respectively). Average NVA in the 4-6 year old group was 0.95 logMAR without and 0.42 logMAR with magnification (p < .001). Average NVA in the 7-8 year was 0.71 logMAR without and 0.01 logMAR with magnification (p < .001). Stronger crowding effects predicted larger improvements of near vision with magnification (p = .021).
Conclusions: A magnifier is equally effective as large print in improving the performance of young children with a range of visual acuities on a crowded near vision task. Visually impaired children with stronger crowding effects showed larger improvements when working with magnification.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s00417-013-2291-x | DOI Listing |
Sensors (Basel)
December 2024
Electronics and Communication Engineering, Indian Institute of Technology Roorkee, Roorkee 247667, India.
In short-range microwave imaging, the collection of data in real environments for the purpose of developing techniques for target detection is very cumbersome. Simultaneously, to develop effective and efficient AI/ML-based techniques for target detection, a sufficiently large dataset is required. Therefore, to complement labor-intensive and tedious experimental data collected in a real cluttered environment, synthetic data generation via cost-efficient electromagnetic wave propagation simulations is explored in this article.
View Article and Find Full Text PDFMicromachines (Basel)
November 2024
Department of Metabolic Health Research, Netherlands Organisation for Applied Scientific Research (TNO), 2333 BE Leiden, The Netherlands.
Background: To accurately measure permeability of compounds in the intestine, there is a need for preclinical in vitro models that accurately represent the specificity, integrity and complexity of the human small intestinal barrier. Intestine-on-chip systems hold considerable promise as testing platforms, but several characteristics still require optimization and further development.
Methods: An established intestine-on-chip model for tissue explants was adopted for intestinal cell monolayer culture.
Materials (Basel)
December 2024
National Materials Corrosion and Protection Data Center, University of Science and Technology Beijing, Beijing 100083, China.
Copper foil is widely used in electronic components and devices. This study investigates the corrosion behavior of copper foil on printed circuit boards exposed for one year in a closed atmospheric environment across 22 different sites in the Sichuan-Tibet region. Through electrochemical, SEM/EDS, and XRD analyses, the corrosion behavior of copper foil material across the five selected sites (Meishan, Mangkang, Luding, Batang, and Panzhihua) and the influence of environmental factors were discussed.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China.
Ceramic armor protection with complex shapes is limited by the difficult molding or machining processing, and 3D printing technology provides a feasible method for complex-shaped ceramics. In this study, ZrO ceramics were manufactured by 3D printing accompanied with microwave sintering. In 3D printing, the formula of photosensitive resin was optimized by controlling the content of polyurethane acrylic (PUA) as oligomer, and the photosensitive resin with 50% PUA showed excellent curing performance with a small volume shrinkage of 4.
View Article and Find Full Text PDFJ Mech Behav Biomed Mater
December 2024
Institute of Continuum Mechanics and Biomechanics, Department of Mechanical Engineering, Friedrich-Alexander-Universität Erlangen-Nürnberg, 90762 Fürth, Germany. Electronic address:
Extrusion-based 3D bioprinting is one of the most promising and widely used technologies in bioprinting. However, the development of bioprintable, biocompatible bioinks with tailored mechanical and biological properties remains a major challenge in this field. Alginate dialdehyde-gelatin (ADA-GEL) hydrogels face these difficulties and enable to tune the mechanical properties depending on the degree of oxidation (% DO) of ADA.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!