Influence of silver incorporation on the structural and electrical properties of diamond-like carbon thin films.

ACS Appl Mater Interfaces

National Physical Laboratory (CSIR), K.S. Krishnan Road, New Delhi 110 012, India.

Published: April 2013

A simple approach is proposed for obtaining low threshold field electron emission from large area diamond-like carbon (DLC) thin films by sandwiching either Ag dots or a thin Ag layer between DLC and nitrogen-containing DLC films. The introduction of silver and nitrogen is found to reduce the threshold field for emission to under 6 V/μm representing a near 46% reduction when compared with unmodified films. The reduction in the threshold field is correlated with the morphology, microstructure, interface, and bonding environment of the films. We find modifications to the structure of the DLC films through promotion of metal-induced sp2 bonding and the introduction of surface asperities, which significantly reduce the value of the threshold field. This can lead to the next-generation, large-area simple and inexpensive field emission devices.

Download full-text PDF

Source
http://dx.doi.org/10.1021/am4003183DOI Listing

Publication Analysis

Top Keywords

threshold field
16
diamond-like carbon
8
thin films
8
dlc films
8
reduce threshold
8
field emission
8
films
6
field
5
influence silver
4
silver incorporation
4

Similar Publications

The oceanic dissolved organic matter (DOM) reservoir is one of Earth's largest carbon pools, yet the factors contributing to its recalcitrance and persistence remain poorly understood. Here, we employed ultra-high resolution mass spectrometry (UHRMS) to examine the molecular dynamics of DOM from terrestrial, marine and mixed sources during bio-incubation over weekly, monthly, and one year time spans. Using Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS), we classified DOM into three distinct categories (Consumed, Resistant and Product) based on their presence or absence at the start and end of the incubation.

View Article and Find Full Text PDF

Multifunctional polymer composites containing micro/nano hybrid reinforcements have attracted intensive attention in the field of materials science and engineering. This paper develops a multi-phase analytical model for investigating the effective electrical conductivity of micro-silicon carbide (SiC) whisker/nano-carbon black (CB) polymer composites. First, CB nanoparticles are dispersed within the non-conducting epoxy to achieve a conductive CB-filled nanocomposite and its electrical conductivity is predicted.

View Article and Find Full Text PDF

Design and Study of a Novel P-Type Junctionless FET for High Performance of CMOS Inverter.

Micromachines (Basel)

January 2025

State Key Discipline Laboratory of Wide Bandgap Semiconductor Technology, School of Microelectronics, Xidian University, Xi'an 710071, China.

In this paper, a novel p-type junctionless field effect transistor (PJLFET) based on a partially depleted silicon-on-insulator (PD-SOI) is proposed and investigated. The novel PJLFET integrates a buried N+-doped layer under the channel to enable the device to be turned off, leading to a special work mechanism and optimized performance. Simulation results show that the proposed PJLFET demonstrates an I/I ratio of more than seven orders of magnitude, with I reaching up to 2.

View Article and Find Full Text PDF

In the present study, a novel normally-off vertical GaN MOSFET with an enhanced AlGaN/GaN channel on the sidewall has been proposed using the technology computer-aided design (TCAD) simulation. By using the selective area growth process, the trench structure and the enhanced sidewall channel are formed simultaneously, which is beneficial to enhance the conduction capability compared with the conventional trenched MOSFET. It demonstrates that a proper hole concentration and thickness of the p-GaN layer are key parameters to balance the threshold voltage, on-state resistance, and off-state breakdown voltage, resulting in the highest Baliga's figure of merit value.

View Article and Find Full Text PDF

Predicting the relative solvent accessibility (RSA) of a protein is critical to understanding its 3D structure and biological function. RSA prediction, especially when homology transfer cannot provide information about a protein's structure, is a significant step toward addressing the protein structure prediction challenge. Today, deep learning is arguably the most powerful method for predicting RSA and other structural features of proteins.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!