Many of the 9 million workers exposed to average noise levels of 85 dB (A) and above are required to wear hearing protection devices, and many of these workers have already developed noise-induced hearing impairments. There is some evidence in the literature that hearing-impaired users may not receive as much attenuation from hearing protectors as normal-hearing users. This study assessed real-ear attenuation at threshold for ten normal-hearing and ten hearing-impaired subjects using a set of David Clark 10A earmuffs. Testing procedures followed the specifications of ANSI S12.6-1984. The results showed that the hearing-impaired subjects received slightly more attenuation than the normal-hearing subjects at all frequencies, but these differences were not statistically significant. These results provide additional support to the finding that hearing protection devices are capable of providing as much attenuation to hearing-impaired users as they do to normal-hearing individuals.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1121/1.399178 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Device and Fitting Protocol for a Transitional Intervention for Debilitating Hyperacusis.
J Speech Lang Hear Res
June 2024
Auditory & Speech Sciences Laboratory, University of South Florida, Tampa.
Purpose: This report describes a hearing device and corresponding fitting protocol designed for use in a transitional intervention for debilitating loudness-based hyperacusis.
Method: The intervention goal is to transition patients with hyperacusis from their typical counterproductive sound avoidance behaviors (i.e.
Measuring earplug noise attenuation: A comparison of laboratory and field methods.
J Occup Environ Hyg
January 2024
Leidos, Inc., Reston, Virginia.
Article Synopsis
- HPD fit-testing evaluates how well hearing protection devices reduce noise exposure, providing a personal attenuation rating (PAR) to help select the best ear protection in various work environments.
- This study compared a standard laboratory test (REAT) with three commercial fit-testing systems and found significant differences in noise attenuation between the lab and field tests, but not among the field systems themselves.
- The results suggest that while there are discrepancies between laboratory and field measurements, the three evaluated commercial fit-test systems are consistent and can be used reliably for hearing protection assessment.
Using a boothless audiometer to estimate personal attenuation rating in a military hearing conservation clinic.
JASA Express Lett
April 2022
Audiology and Speech Center, Walter Reed National Military Medical Center, Bethesda, Maryland 20814, USA
Hearing protection device (HPD) fit-testing is considered "best practice" for hearing conservation programs in the military. Yet many hearing conservation personnel do not have access to dedicated fit-test equipment. In this study, estimates of personal attenuation rating (PAR) obtained with a boothless audiometer are compared to those obtained with a field-microphone in a real ear (F-MIRE) system.
View Article and Find Full Text PDFA Tester to Evaluate the Correct Placement of Earplugs.
Int J Environ Res Public Health
July 2022
Department of Vibroacoustic Hazards, Central Institute for Labor Protection-National Research Institute, Czerniakowska 16, 00-701 Warsaw, Poland.
The use of hearing protection devices is one possible way of reducing the negative impact of noise on hearing. However, it is important to keep in mind that only properly used hearing protection devices provide adequate hearing protection. The aim of this article is to describe a newly developed tester to verify the correct placement of earplugs in the ear canal.
View Article and Find Full Text PDFVerification of Attenuation for Premolded Hearing Protection Devices Designed for Music.
Med Probl Perform Art
June 2022
Callier Center for Communication Disorders, 1966 Inwood Road, Dallas, TX 75235, USA. Tel 972-883-3018.
High-fidelity premolded earplugs (HiFi HPDs) are designed to provide relatively uniform attenuation across frequencies. The primary goal of this study was to verify the amount and flatness of individual user attenuation. HiFi HPD attenuation was measured using real-ear attenuation at threshold (REAT) measurements under circumaural earphones.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!