Background: In this study, we evaluate a new bioadhesive for intra-abdominal onlay mesh fixation of a polypropylene-polyvinylchloride graft.
Methods: Three pieces of a commercially available polypropylene/polyvinylfluoride mesh, each 3 × 3 cm in size, and three pieces of the same mesh coated with a polysaccharide bioadhesive were fixated to the surface of the anterior abdominal wall of 30 New Zealand white rabbits. The fixation was performed either by using four transabdominal Prolene(®) 4/0 sutures, four spiral tacks (Protack 5 mm Tyco), or cyanoacrylate glue (Glubran(®) GEM, Viareggio, Italy). Each mesh position and the according kind of fixation were randomized before implantation. The animals were sacrificed 12 weeks postoperatively. After determining the extent of intra-abdominal adhesions, the meshes were excised en bloc with the anterior abdominal wall for tensile strength measurements and histological analysis.
Results: All meshes coated with the bioadhesive adhered to the intact peritoneum without extra fixation. Irrespective of the fixation technique coated meshes led to more and stronger adhesions. Mesh shrinkage by scarring was increased in coated meshes fixed with glue and low in uncoated meshes fixed with tacks. Testing the tensile strength, coated meshes fixed with transfascial sutures achieved the best results (16.14 ± 6.1 N), whereas coated meshes fixed with glue showed the lowest strength (10.39 ± 4.81 N). The foreign body reaction was considerably more distinctive using coated mesh. The mesh ingrowth was not influenced by this reaction.
Conclusions: All meshes coated with the new bioadhesive were self-adhesive in that way; they stayed in position when attached to the peritoneum. Although this may facilitate intra-operative mesh fixation, the bioadhesive displayed several disadvantages, such as stronger adhesions and an increased shrinkage of the implant. The tensile strength was not influenced by the use of the bioadhesive. At present, we see no major advantage for polysaccharide bioadhesive applied in this study.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s00464-012-2699-0 | DOI Listing |
Biomater Sci
January 2025
Biotechnology Centre, The Silesian University of Technology, B. Krzywoustego 8, 44-100, Gliwice, Poland.
Metallic biomaterials are extensively used in orthopedics and dentistry, either as implants or coatings. In both cases, metal ions come into contact with surrounding tissues causing a particular cell response. Here, we present a biofabricated tissue model, consisting of a hydrogel reinforced with a melt electrowritten mesh, to study the effects of bound and released metal ions on surrounding cells embedded in a hydrogel matrix.
View Article and Find Full Text PDFEnergy Fuels
January 2025
Department of Chemical and Biological Physics, Weizmann Institute of Science, Rehovot 7610001, Israel.
Producing hydrogen through water splitting often faces challenges of overpotential, stability, and expensive catalysts, which limit its efficiency and hinder the advancement of hydrogen production technologies. Nickel foam and nickel meshes have emerged as promising materials for electrolyzer electrodes due to their high surface area and the ability to produce electrolyzers with a very small gap between the anode and cathode. This study presents a simple method for coating Ni-based electrodes with a chiral Ni-Au film, using electroplating, thus enhancing its efficiency dramatically.
View Article and Find Full Text PDFPolymers (Basel)
December 2024
Faculty of Pharmacy, Vasile Goldis Western University of Arad, 310130 Arad, Romania.
Polyethylene terephthalate (PET) is a widely utilized synthetic polymer, favored in various applications for its desirable physicochemical characteristics and widespread accessibility. However, its extensive utilization, coupled with improper waste disposal, has led to the alarming pollution of the environment. Thus, recycling PET products is essential for diminishing global pollution and turning waste into meaningful materials.
View Article and Find Full Text PDFBiomater Adv
January 2025
Univ. Lille, CNRS, INRAE, Centrale Lille, UMR 8207 - UMET - Unité Matériaux et Transformations, F-59000 Lille, France. Electronic address:
Abdominal hernia repair is a common surgical procedure, involving in most cases the use of textile meshes providing a mechanical barrier to consolidate the damaged surrounding tissues and prevent the resurgence of the hernia. However, in more than half cases postoperative complications such as adhesions and infections occur at the surface of the mesh, leading to chronic pain for the patient and requiring the removal of the implant. One of the most promising strategies to reduce the risk of postoperative adhesions and infections is to add a physical barrier between the mesh and the abdominal walls.
View Article and Find Full Text PDFGels
October 2024
Departamento de Medicina y Especialidades Médicas, Facultad de Medicina y Ciencias de la Salud, Universidad de Alcalá, 28805 Alcalá de Henares, Spain.
Prosthetic mesh infection constitutes one of the major postsurgical complications following abdominal hernia repair. Antibacterial coatings represent a prophylactic strategy to reduce the risk of infection. This study assessed the in vitro response of two antibacterial gels made of 1% carboxymethylcellulose (CMC) functionalized with an antiseptic (chlorhexidine, CHX) or an antibiotic (rifampicin, RIF), developed for the coating of polypropylene (PP) meshes for hernia repair.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!