We describe three different interferometric techniques (electronic speckle pattern interferometry, digital holographic interferometry, and digital shearography), using a long-wave infrared radiation produced by a CO(2) laser and recorded on a microbolometer array. Experimental results showing how these methods can be used for nondestructive testing are presented. Advantages and disadvantages of these approaches are discussed.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/AO.52.000A56 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Blind-label subwavelength ultrasound imaging.
Sci Adv
January 2025
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, 3436 Engineering Hall, 1415 Engineering Drive, Madison, WI 53706, USA.
There is a long-existing trade-off between the imaging resolution and penetration depth in acoustic imaging caused by the diffraction limit. Most existing approaches addressing this trade-off require controlled "labels," i.e.
View Article and Find Full Text PDFFluoropolymer-Single Crystal Nanocomposite Based Transducer Fabrication for Bio-Imaging.
Adv Healthc Mater
January 2025
Department of Physical Sciences, Indian Institute of Science Education and Research Mohali, Knowledge City, Sector 81, SAS Nagar, Manauli, 140306, India.
Fluoropolymer alone, as an alternative to lead-based piezoelectric materials, has shown multiple challenges to develop useful sensors for solving real-world problems such as photoacoustic, ultrasound pulse echo, and other non-destructive testing. This work demonstrates the fabrication of high frequency and wide bandwidth transducers with fluoropolymer and highly polarizing cubic single crystal Barium titanate (BaTiO) ceramic composite for high resolution in-vivo photo-acoustic and ultrasound imaging. For transducer fabrication, a customized bio-compatible nanocomposite sensor film of PVDF-TrFE (Polyvinylidene fluoride trifluoroethylene)/BaTiO (BTO) is synthesized by drop and dry in heating-cum-electro-poling system for advancing polarization, crystallinity, and higher charge generation.
View Article and Find Full Text PDFDeep learning aided determination of the optimal number of detectors for photoacoustic tomography.
Biomed Phys Eng Express
January 2025
Applied Sciences, Indian Institute of Information Technology Allahabad, Deoghat, Jhalwa, Allahabad, 211012, INDIA.
Photoacoustic tomography (PAT) is a non-destructive, non-ionizing, and rapidly expanding hybrid biomedical imaging technique, yet it faces challenges in obtaining clear images due to limited data from detectors or angles. As a result, the methodology suffers from significant streak artifacts and low-quality images. The integration of deep learning (DL), specifically convolutional neural networks (CNNs), has recently demonstrated powerful performance in various fields of PAT.
View Article and Find Full Text PDFNovel anchor-type proximal femoral nail for the improvement of bone-fixation integrity in treating intertrochanteric fractures: an experimental and computational characterization study.
Comput Methods Biomech Biomed Engin
January 2025
Department of Orthopedics and Traumatology, Izmir Bozyaka Education and Research Hospital, Izmir, Turkey.
This study introduces a novel anchor-type proximal femoral nail (AT-PFN) to improve the bone-fixation integrity over the standard screw-type nail (SST-PFN). Quasi-static incremental cyclic load test was performed to investigate load-displacement, cumulative deformation energy, time-strain, and backbone curves. The finite element analysis (FEA) was implemented to identify the stress and strain distributions.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!