Two novel polypyrrole (PPy) composite solid-phase microextraction (SPME) fiber coatings involving polypyrrole β-naphthalenesulfonic acid (PPy/β-NSA) and polypyrrole graphene (PPy/GR) composite SPME fiber coatings were prepared by a simple sol-gel technique for selectively sampling relatively polar biological volatile organic compounds (VOCs). Crucial preparation conditions of the PPy composite SPME fiber coatings were optimized and are discussed in detail. Physical tests suggested that the PPy composite SPME fiber coatings possessed a porous surface morphology, stable chemical and thermal properties. Due to the inducing polar functional groups in the PPy molecule, the PPy composite SPME fiber coatings achieved a higher extraction capacity and special selectivity for the polar biological VOCs with conjugate structures, compared with commercial SPME fiber coatings. Enrichment factors of most of the VOCs by the PPy/β-NSA and PPy/GR SPME fibers were much higher than those achieved by common commercially available SPME fiber coatings. Finally, the PPy/β-NSA and PPy/GR SPME fiber coatings were applied for the trace analysis of typical polar VOCs from ant and coriander samples coupled with gas chromatography/mass spectrometry (GC/MS) detection, respectively. It was satisfactory that the average contents of 4-heptanone, 4-heptanol, 4-nonanone and methyl 5-methylsalicylate from ant samples were actually found to be 28.0, 58.7, 3.0 and 0.6 μg g(-1), and the average contents of nonane, decanal, undecanal and dodecanal from coriander samples were actually found to be 0.79, 0.13, 0.06 and 0.21 μg g(-1). The results suggested that PPy composite SPME coatings will be a potentially excellent sampling technique for the trace analysis of polar biological VOCs.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/c2an36231g | DOI Listing |
Sci Adv
January 2025
Department of Physics and Technology, University of Bergen, Allegaten 55, Bergen 5007, Norway.
The polar bear () is the only Arctic land mammal that dives into water to hunt. Despite thermal insulation provided by blubber and fur layers and low Arctic temperatures, their fur is typically observed to be free of ice. This study investigates the anti-icing properties of polar bear fur.
View Article and Find Full Text PDFThis paper employed a two-color double-pulse femtosecond laser (TDFL) technology for surface processing of carbon fiber reinforced polymers (CFRP). By exploring the changes in ablation thresholds for resin and carbon fiber under varying wavelengths and pulse numbers, optimal wavelength combinations were identified. Adjustments to processing parameters and pulse delay enabled precise removal of the CFRP surface, targeting resin while causing no damage to the underlying carbon fibers.
View Article and Find Full Text PDFFlexible infrared image fiber bundles (FBs) are capable of delivering thermal images of areas that are difficult for ordinary thermal cameras to access while making the imaging systems compact and lightweight. Thus, FB-based thermal imaging systems show great potential in some important applications, such as infrared endoscopy, aircraft infrared warning, and satellite remote sensing. In most applications, FBs are required to have high overall transmittance (OT) and high spatial resolution (), but the fabrication of such high-performance FBs is still a challenge.
View Article and Find Full Text PDFUltrashort pulse sources are complex and resource-intensive. To reduce overhead and simplify operations, we had previously developed a method to deliver ultra-short pulses through fiber-optic links to multiple locations and to characterize them remotely using a compact detector module. We created a pulse pair with varying delays at the central location using a pulse shaper before launching them into the fiber links and measured the first and second-order autocorrelations at the satellite location.
View Article and Find Full Text PDFWe propose and experimentally demonstrate what we believe to be the first mid-infrared surface plasmon resonance (SPR) fiber optic sensor using a D-shaped multimode silica optical fiber coated with a 105 nm indium tin oxide (ITO) layer. The sensor shows resonance around 2700 nm, with a refractive index sensitivity of 1065.70 nm per refractive index unit (nm/RIU) for refractive indices ranging from 1.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!