Ordered anodic aluminum oxide (AAO) templates with pores <15 nm in diameter and an aspect ratio (length-to-diameter ratio) above 3 × 10(3) have been fabricated using a nonlithographic approach; specifically, by anodizing aluminum in an ethylene-glycol-containing sulfuric acid electrolyte. The pores are the smallest in diameter reported for a self-ordered AAO without pore aspect-ratio limitations and good ordering, which opens up the possibility of obtaining nanowire arrays in the quantum confinement regime that is of interest for efficient thermoelectric generators. The effect of the ethylene glycol addition on both the pore diameter and the ordering is evaluated and discussed. Moreover, 15-nm-diameter Bi(2)Te(3) and poly(3-hexyl thiophene) (P3HT) nanowires have been prepared using these AAO templates. As known, Bi(2)Te(3) is currently the most efficient thermoelectric bulk material for room-temperature operations and, according with theory, its Seebeck coefficient should be increased when it is confined to nanowires with diameters close to 10 nm. On the other hand, P3HT is one of the main candidates for integrating organic photovoltaic and thermoelectric devices, and its properties are also proposed to increase when it is confined to nanoscale structures, mainly due to molecular orientation effects.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/am3020718 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Photoexcited CuO/TiO Heterojunction for Photoelectrochemical Sensors for Nonenzymatic Glucose Detection.
Langmuir
January 2025
Department of Bioinformatics and Medical Engineering, Asia University, Taichung 413305, Taiwan.
Photoelectrochemical sensors have been studied for glucose detection because of their ability to minimize background noise and unwanted reactions. Titanium dioxide (TiO), a highly efficient material in converting light into electricity, cannot utilize visible light. In this regard, we developed a nonenzymatic glucose sensor by using a simple one-step electrospinning technique to combine cupric oxide with TiO to create a heterojunction.
View Article and Find Full Text PDFHigh-Aspect-Ratio InGaO Integrated with Amorphous AlO Nanofibers: All-Inorganic Self-Supporting Wearable Membranes for Ultralow-Concentration NO Sensing in Simulated Exhalation.
Nano Lett
January 2025
School of Optical and Electronic Information, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, China.
Article Synopsis
- The study addresses challenges in creating flexible, breathable, and sensitive inorganic semiconductor gas sensors for wearable use in humid conditions.
- Researchers developed a self-supporting InGaO-AlO/AlO nanofiber membrane sensor using an innovative dual-spinneret electrospinning technique, featuring a unique bilayer structure.
- The resulting sensor is highly effective for detecting low concentrations of NO biomarkers (≈15 ppb) under breath-simulated conditions and maintains performance after extensive bending cycles, paving the way for advances in breath-based diagnostic applications.
Development of Highly Stretchable Ag-MWCNT Composite for Screen-Printed Textile Electronics with Improved Mechanical and Electrical Properties.
Nanotechnol Sci Appl
December 2024
Institute of Mechanics and Printing, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Warsaw, Poland.
Introduction: The rapid growth of flexible and wearable electronics has created a need for materials that offer both mechanical durability and high conductivity. Textile electronics, which integrate electronic pathways into fabrics, are pivotal in this field but face challenges in maintaining stable electrical performance under mechanical strain. This study develops highly stretchable silver multi-walled carbon nanotube (Ag-MWCNT) composites, tailored for screen printing and heat-transfer methods, to address these challenges.
View Article and Find Full Text PDFSynergistically piezocatalytic and Fenton-like activation of HO by a ferroelectric Bi(BiFe)O catalyst to boost degradation of polyethylene terephthalate microplastic (PET-MPs).
J Colloid Interface Sci
March 2025
Key Laboratory of Surface & Interface Science of Polymer Materials of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China; School of Chemistry and Chemical Engineering, Key Laboratory of Surface & Interface Science of Polymer Materials of Zhejiang Province, Zhejiang Sci-Tech University, Hangzhou 310018, China. Electronic address:
Pollution of microplastics (MPs) has been drastically threating human health, however, whose elimination from the environment by current approaches is inefficient due to their high molecular weight, stronghydrophobicity and stable covalent bonds. Herein, we report a novel and highly-efficient route to degrade MPs contaminants through synergistically piezocatalytic and Fenton-like activation of HO by a ferroelectric Bi(BiFe)O catalyst under ultrasound treatment. For 10 g/L polyethylene terephthalate microplastics (PET-MPs), the synergistic strategy reached a 28.
View Article and Find Full Text PDFHighly uniform silicon nanopatterning with deep-ultraviolet femtosecond pulses.
Nanophotonics
September 2024
CIC nanoGUNE BRTA, Donostia-San Sebastian, Spain.
Article Synopsis
- The use of nanophotonic methods for controlling photon-electron interactions is gaining interest in the particle accelerator field, with silicon-based integrated dielectric laser acceleration (DLA) emerging as a promising option.
- The study demonstrates a method using deep ultraviolet (DUV) ultrafast laser excitation to create silicon nanostructures over large areas, achieving features smaller than the diffraction limit.
- The technique results in highly uniform, high aspect-ratio structures, with notable periodicity and intricate 2D features, making it a simple and cost-effective approach for efficient silicon nanostructure production.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!