Shear-induced alignment and dynamics of elongated granular particles.

Phys Rev E Stat Nonlin Soft Matter Phys

Institute for Solid State Physics and Optics, Wigner Research Center for Physics, Hungarian Academy of Sciences, PO Box 49, H-1525 Budapest, Hungary.

Published: November 2012

The alignment, ordering, and rotation of elongated granular particles was studied in shear flow. The time evolution of the orientation of a large number of particles was monitored in laboratory experiments by particle tracking using optical imaging and x-ray computed tomography. The experiments were complemented by discrete element simulations. The particles develop an orientational order. In the steady state the time- and ensemble-averaged direction of the main axis of the particles encloses a small angle with the streamlines. This shear alignment angle is independent of the applied shear rate, and it decreases with increasing grain aspect ratio. At the grain level the steady state is characterized by a net rotation of the particles, as dictated by the shear flow. The distribution of particle rotational velocities was measured both in the steady state and also during the initial transients. The average rotation speed of particles with their long axis perpendicular to the shear alignment angle is larger, while shear aligned particles rotate slower. The ratio of this fast/slow rotation increases with particle aspect ratio. During the initial transient starting from an unaligned initial condition, particles having an orientation just beyond the shear alignment angle rotate opposite to the direction dictated by the shear flow.

Download full-text PDF

Source
http://dx.doi.org/10.1103/PhysRevE.86.051304DOI Listing

Publication Analysis

Top Keywords

shear flow
12
steady state
12
shear alignment
12
alignment angle
12
particles
9
elongated granular
8
granular particles
8
shear
8
aspect ratio
8
dictated shear
8

Similar Publications

Prospects of cowpea protein as an alternative and natural emulsifier for food applications: Effect of pH and oil concentration.

Int J Biol Macromol

January 2025

Department of Food Engineering and Technology, Institute of Biosciences, Humanities and Exact Sciences, São Paulo State University (UNESP), Street Cristóvão Colombo, 2265, São José do Rio Preto 15054-000, Brazil. Electronic address:

In response to the growing need to expand the knowledge base on novel, more sustainable protein sources, this study investigated the effectiveness of cowpea protein concentrate (CPC) as a natural emulsifying agent, examining the relationships between pH (3-11), oil concentration (2-10 %), and emulsion stability. pH and oil concentration significantly impacted droplet size distribution, with uniformity decreasing in the order of pH 9 > pH 11 > pH 7, which was attributed to droplet coalescence and flocculation. As evidenced by circular dichroism, alkalinity induced a slight increase in the beta-sheet content of CPC, while simultaneously reducing the alpha-helix content.

View Article and Find Full Text PDF

Impeller radial gap is one of important parts within a blood pump, which may affect the hemodynamics and hemocompatibility. In this study, computational fluid dynamics method was performed to evaluate the impact of radial gap sizes. The volume of scalar shear stress decreased with radial gap sizes increasing.

View Article and Find Full Text PDF

: Sinus lifting, a procedure to augment bone in the maxilla, may cause complications such as sinusitis due to impaired drainage. This study aimed to assess how sinus lifting impacts airflow in the sinus cavity, which is essential for patients undergoing dental implants. Using computational fluid dynamics (CFD), this research analyzed airflow changes after sinus floor elevation, offering insights into the aerodynamic consequences of the procedure.

View Article and Find Full Text PDF

The cavitation water jet cleaning and coating removal technique represents an innovative sustainable method for cleaning and removing coatings, with the nozzle serving as a crucial component of this technology. Developing an artificially submerged nozzle with a reliable structure and excellent cavitation performance is essential for enhancing cavitation water jets' cleaning and coating removal efficacy in an atmosphere environment (non-submerged state). This study is based on the shear flow cavitation mechanism of an angular nozzle, the resonance principle of an organ pipe, and the jet pump principle.

View Article and Find Full Text PDF

Elucidating the effect of chitosan microgel characteristics on the large amplitude oscillatory shear (LAOS) behavior of their stabilized high internal phase emulsions using the sequence of physical processes (SPP) approach and comparison with mayonnaise.

Int J Biol Macromol

January 2025

Glyn O. Phillips Hydrocolloid Research Centre, National "111" Center for Cellular Regulation and Molecular Pharmaceutics, Key Laboratory of Industrial Microbiology in Hubei, Key Laboratory of Fermentation Engineering (Ministry of Education), Department of Bioengineering and Food Science, Hubei University of Technology, Wuhan 430068, China; Food Hydrocolloid International Science and Technology Cooperation Base of Hubei Province, Wuhan 430068, China. Electronic address:

Chitosan microgels (h-CSMs) were prepared by cross-linking hydrophobically modified chitosan with sodium phytate (SP). Emulsions stabilized by h-CSMs with different inter-phase fraction, microgel concentration and cross-linking density were studied of their microstructural and rheological properties. In particular, the large amplitude oscillatory shear (LAOS) of the high internal phase emulsions (HIPEs) stabilized by h-CSMs were systematically analyzed using the Fourier transform with Chebyshev polynomials (FTC) and sequence of physical processes (SPP) methods, to explore their nonlinear rheological properties.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!