Black liquor from the kraft process facilitates quantitative biomass hydrolysis converting cellulose and hemicellulose into organic acids such as lactic acid (~50%), and lignin into small molecular aromatics, without gasification and black tar formation. Oxygen transfer between lignin and carbohydrates may be the mechanism. With this method, three tons of lignocellulosic biomass can potentially produce up to one ton of lactic acid, and one ton of small molecular aromatics. This novel usage of black liquor is environmentally viable because it is accompanied by significant emission reduction of particulates, sulfur and nitrogen oxides, most organic sulfur compounds and sulfites of black liquor were converted into sulfates.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.biortech.2012.10.072 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Lignin and black liquor based composite hydrogels for the enhanced adsorption of malachite green dye from aqueous solutions: Kinetics, rheology and isotherm studies.
Int J Biol Macromol
January 2025
Department of Chemical Engineering, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar 144008, Punjab, India. Electronic address:
Article Synopsis
- Effluent from the textile industry, particularly dye wastewater like malachite green, poses significant environmental risks, leading to increased research into sustainable dye removal methods.
- A hydrogel composite was developed using black liquor from corncobs and sodium alginate, achieving optimal dye adsorption at a 1:4 weight ratio, with a capacity of 650 mg/g for a dye concentration of 1500 mg/L.
- Characterization techniques confirmed high dye removal efficiencies (up to 95.54%) for both the black liquor/sodium alginate and alkaline lignin/sodium alginate hydrogels, with the adsorption kinetics fitting the pseudo-second-order model and a strong correlation to the Langmuir isotherm.
Extraction of high-purity lignin from the kraft pulping black liquor by enzyme purification process with alkaline-resistant xylanase and cellulase.
Int J Biol Macromol
January 2025
Shandong Huatai Paper Co., Ltd. & Shandong Yellow Triangle Biotechnology Industry Research Institute Co. LTD, Dongying 257335, China.
In this study, the response surface methodology was first utilized to optimize the enzyme treatment conditions as reaction pH, temperature, time and enzyme dosage of 9.5, 45 °C, 94.5 min and 100 U/L.
View Article and Find Full Text PDFPrevalence of meconium-stained amniotic fluid and factors associated with emergency cesarean section: multicenter cross-sectional study in south central Ethiopia.
Front Glob Womens Health
December 2024
College of Medicine and Health Sciences, Bahirdar University, Bahirdar, Ethiopia.
Background: Meconium is thick black-green fetal intestinal content starting from the early first trimester of gestation. Unfortunately, if it is released into the amniotic cavity due to any cause, it can be associated with neonatal mortality and morbidity.
Objective: To identify the factors associated with meconium-stained amniotic fluid among mothers undergoing emergency cesarean section in specialized hospitals cross-sectional study in south central Ethiopia from August 1, 2022, to 30, October 2022.
Lignin nano/micro-particles from agricultural biomasses: Developing direct precipitation for integrated biorefinery.
Bioresour Technol
December 2024
CIRTECH Institute, HUTECH University, Ho Chi Minh City, Viet Nam. Electronic address:
The state-of-the-art, simple and scalable methods for lignin micro-/nano-particles recovery from agricultural biomasses were evaluated in this review. Being non-wood biomasses, these materials can be easily fibrillated, supporting the usage of mild soda or organic solvent pretreatment. Different approaches in particle recovery were compared to conclude that the bottom-up approach facilitates smaller particles towards the nano-size range whereas mechanical treatment can act as a supporting method to increase uniformity and reduce particle sizes after bottom-up precipitation.
View Article and Find Full Text PDFFactorial designs are accurate tools to pick up the most promising extremophiles for future biosurfactant production.
Sci Total Environ
January 2025
Instituto de Investigaciones para la Industria Química (INIQUI), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) - Universidad Nacional de Salta (UNSa), Argentina; Facultad de Ciencias Naturales, UNSa, Argentina. Electronic address:
In this study, five strains previously isolated from black liquor (BL) and vinasse (V) were tested to assess the most promising regarding its capacity of biosurfactant production. For that, four factorial designs of two factors at two levels (2) were run for each strain. Selected factors were the production time and the composition media, while the surface tension reduction and optical density were the responses variables.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!