A novel ultrasound assisted method for preparing supported liquid membranes is described in this paper. The stability and efficiency of the supported liquid membrane obtained was tested by removing cobalt(II) from aqueous solutions through a facilitated countertransport mechanism using CYANEX 272 as carrier and protons as counterions. The results are compared with those obtained using supported liquid membranes prepared by soaking the polymeric material in the organic solution of the carrier at atmospheric pressure and under vacuum, both for 24h. Higher transport efficiency (>5%), flux (∼18%), permeability (∼20%) and stability (>6% in the second run and ∼10% in the third run) were obtained by the supported liquid membrane prepared using the ultrasound assisted method. These findings can be explained by the effects of cavitation and acoustical streaming - which result from the ultrasound passing through the organic solution of the extractant - on the porous structure of the polymer support and on the pore filling.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ultsonch.2012.10.002 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Resonance frequency prediction of dielectric antennas for liquid sensing via support vector regression.
Sci Rep
December 2024
Computer Engineering Department, Lorestan University, Khorramabad, Iran.
This paper presents a slot antenna integrated with a split ring resonator (SRR) and feed line, designed to achieve a high Q-factor while maximizing channel capacity utilization. By incorporating a lens into the dielectric resonator antenna (DRA), we enhance both bandwidth and directivity, with the dielectric material's permittivity serving as a key control parameter for radiation characteristics. We explore water and ethanol as controllable dielectrics within the terahertz (THz) frequency range (0.
View Article and Find Full Text PDFEfficient synthesis of α-aminophosphonates using magnetically retrievable ionic nanocatalysts under ultrasound acceleration.
Sci Rep
December 2024
Department of Chemistry, Science and Research Branch, Islamic Azad University, Tehran, Iran.
Magnetic supported ionic liquids are a unique subclass of ionic liquids that possess the ability to respond to external magnetic fields, combining the advantageous properties of traditional ILs with this magnetic responsiveness. A novel magnetic ionic nanocatalyst of FeO@SiO@CPTMS-DTPA was prepared by anchoring an ionic liquid, CPTMS-DTPA, onto the surface of silica-modified FeO. The morphology, chemical structure and magnetic property of the magnetic ionic nanocatalyst structure was characterized using scanning electron microscopy, X-ray powder diffraction, Fourier transformation infrared spectroscopy, vibrating sample magnetometer, and thermogravimetric analysis.
View Article and Find Full Text PDFSimultaneous Determination of Vitamins A and E and Their Generated Metabolites in Human Serum by LC-MS/MS.
Biomed Chromatogr
January 2025
Beijing Harmony Health Medical Diagnostics Co., Ltd., Beijing, China.
In the context of personalized and precision medicine, simultaneous monitoring of different forms of vitamins A and E and their metabolites could help us better understand the status of vitamins A and E in the body. The aim of this study was to establish a method for simultaneous determination of 13 kinds of vitamins A and E and their metabolites in human serum. Serum samples were directly detected by LC-MS/MS after deproteinization.
View Article and Find Full Text PDFHow to Convert a 3D Printer to Personal Automated Liquid Handler for Life Science Workflows.
SLAS Technol
December 2024
Center for Biomedical Engineering, School of Engineering, Brown University, Providence, RI 02912, USA. Electronic address:
Automated liquid handlers are fundamental in modern life science laboratories, yet their high costs and large footprints often limit accessibility for smaller labs. This study presents an innovative approach to decentralizing a liquid handling system by converting a low-cost 3D printer into a customizable and accurate liquid handler. The Personal Automated Liquid Handler (PALH) system, costing ∼$400, incorporates a single-channel pipet, custom 3D-printed components, and open-source software for personalized workflows, allowing researchers to build and modify the system for specific experimental needs.
View Article and Find Full Text PDFOptimizing extraction conditions for isolation of antioxidant compounds from black rice bran using ultrasonic-assisted extraction and response surface methodology.
J Food Sci
December 2024
School of Biotechnology, Institute of Agricultural Technology, Suranaree University of Technology, Nakhon Ratchasima, Thailand.
Black rice bran (BRB), a valuable byproduct from the rice milling process, possesses numerous pharmacological activities, including antioxidant potential, but information regarding highly efficient extraction methods is scarce. To enhance the extraction efficiency, ultrasonic-assisted extraction coupled with Box-Behnken design (BBD) was used in this study to maximize the total phenolic content (TPC), total flavonoid content (TFC), total anthocyanin content (TAC), and antioxidant capacity of BRB extract. The BBD results showed that 57% ethanol at 50°C and pH 3.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!