Statement Of Problem: Subgingival positioning of a single dental implant may result in a less stable impression coping in a polymerized impression material.

Purpose: The purpose of this study was to evaluate the influence of a single dental implant placement depth and different impression materials on the stability of an open tray impression coping.

Material And Methods: Six polyvinyl chloride-based plastic models with single embedded internal hexagon implant analogs were fabricated. The implant analogs were placed equally with their surface 0, 1, 2, 3, 4, or 5 mm below the simulated gingival margin. Open tray impression copings were connected to the embedded implant analogs, and impressions were made with different vinyl polysiloxane (VPS) impression materials, polyethers, and an addition silicone-based occlusal registration material. The laboratory analogs were connected to the impression copings and the plastic trays were placed in a locking device. A measuring device, consisting of a compression force gauge connected to a platform moving at a speed of 3.2 mm/s, was fabricated. The impression trays were fixed so that the pole of the force gauge would touch the surface of the implant analog in the same place and push it 1.0 mm. Measurements of each specimen were made 5 times. Statistical analysis was performed with a 1-way ANOVA, the Tukey test, and the Pearson correlation coefficient (α=.05).

Results: There was a significant negative correlation between the dental implant placement depth and the force needed to move the impression coping (P<.05). In all depth groups, the impression coping was significantly more stable when the impressions were made with the occlusal registration material (P<.05).

Conclusions: As the dental implant placement depth increased, the force needed to move the impression coping decreased. The coping was significantly more stable when an occlusal registration material was used to make the impression.

Download full-text PDF

Source
http://dx.doi.org/10.1016/S0022-3913(12)60169-3DOI Listing

Publication Analysis

Top Keywords

implant placement
12
placement depth
12
open tray
12
tray impression
12
impression coping
12
dental implant
12
implant analogs
12
impression
11
depth impression
8
stability open
8

Similar Publications

Unlabelled: Peri-implantitis (PI) is an inflammatory disease that affects supportive tissues around dental implants, and its progression eventually leads to bone loss and implant failure. However, PI effects may be different based on the presence or absence of adjacent teeth.

Objective: To investigate the differences in bone loss and inflammation between implants placed adjacent to a tooth or edentulous area in a ligature-induced PI model.

View Article and Find Full Text PDF

Objective: To maximize local tumor control, stabilize affected bones, and preserve or replace joints with minimal interventional burden, thereby enhancing quality of life for empowered living.

Indications: Suitable for patients with bone metastases, particularly those with severe pain and/or fractures and appropriate life expectancy.

Contraindications: In primary bone tumors, refer to the sarcoma surgery team for evaluation of wide resection.

View Article and Find Full Text PDF

Immediate Implant Placement in a Hypothyroid Geriatric Patient: Aesthetic Excellence, Secondary Stability, and Successful Outcome-A Case Report.

Plast Aesthet Nurs (Phila)

December 2024

Sowmya Srinivas, BDS, MDS, PhD, is an Assistant Professor at the Department of Prosthodontics, JSS Dental College and Hospital, JSS Academy of Higher Education and Research, Mysore, Karnataka, India.

Placing an implant immediately into extraction sockets provides a distinct advantage over delayed placement, eliminating the need for a 4 to 6 months waiting period for bone formation. However, when patients present with hypothyroidism, the feasibility of immediate placement of dental implants becomes uncertain. This case involved a hypothyroid woman in her late 60s with loose lower anterior teeth.

View Article and Find Full Text PDF

Minimally Invasive Placement of Cannulated Headless Compression Screws for Reduction of Sacroiliac Luxation in 14 Cats.

Vet Comp Orthop Traumatol

December 2024

Surgery Department, Evidensia Dierenziekenhuis Hart van Brabant, Waalwijk, Brabant, The Netherlands.

Objective:  To describe percutaneous fluoroscopy-guided placement of self-drilling, self-tapping, 3.0 mm cannulated headless compression screws (HCS) for surgical reduction of sacroiliac luxation (SIL) in cats, and to document clinical outcome.

Materials And Methods:  Medical records of cats with SIL, managed by percutaneous fluoroscopy-guided placement of a 3.

View Article and Find Full Text PDF

Objectives: Our goal was to measure the impact of postpartum implant insertion timing on breastfeeding success and duration in a population at high-risk for low milk supply.

Study Design: We conducted a three-armed randomized non-inferiority study of postpartum people who plan to breastfeed and have known risk factors for low milk supply. Participants were randomized to one of three groups for the timing of implant placement: within 30 minutes of placental delivery, 24-72 hours postpartum, or 6+ weeks postpartum.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!