AI Article Synopsis

  • Zinc oxide reacts with fatty acids in oil-based paints, forming zinc carboxylates that can lead to deterioration in older artwork, particularly with zinc stearate aggregates.
  • The study uses advanced FT-IR techniques to analyze the composition of aged artists' oil paints, revealing significant differences in carboxylate profiles between exposed and protected paint surfaces.
  • Aluminum stearate, a common additive, notably impacts zinc carboxylate distribution more than the type of pigment or oil used, affecting the long-term stability of historical paintings.

Article Abstract

Zinc oxide is a prevalent industrial-age pigment that readily reacts with fatty acids in oil-based paints to form zinc carboxylates. Zinc stearate aggregates are associated with deterioration in late nineteenth and twentieth century paintings. The current study uses both conventional and synchrotron Fourier transform infrared spectroscopy (FT-IR) to investigate metal carboxylate composition in a range of naturally aged artists' oil paints and reference paint film draw-downs. The paints contain zinc oxide alone or in combination with lead white, titanium white, and aluminum stearate and are prepared with linseed and safflower oils. Attenuated total reflectance (ATR)-FT-IR using the conventional source identifies marked differences in carboxylate profiles between exposed and protected surfaces in a large number of samples. Synchrotron FT-IR microspectroscopy of thin paint cross-sections maps metal carboxylate distributions at high spatial resolution and resolves broad concentration gradients and micrometer-scale phase separation of carboxylate species. Aluminum stearate, a common paint additive, is found to influence the distribution of zinc carboxylates more strongly than pigment composition or oil type. The presence of aluminum stearate results in higher concentrations and more pronounced separation of saturated C16 and C18 chain zinc carboxylates in the margin of paint nearest the polyester substrate. The presence of aluminum stearate in association with zinc oxide has a clear influence on zinc carboxylate formation and distribution, with potential implications for long term stability of vulnerable paintings.

Download full-text PDF

Source
http://dx.doi.org/10.1366/12-06659DOI Listing

Publication Analysis

Top Keywords

aluminum stearate
16
zinc oxide
12
zinc carboxylates
12
artists' oil
8
oil paints
8
reference paint
8
conventional synchrotron
8
zinc
8
metal carboxylate
8
presence aluminum
8

Similar Publications

This paper presents the results of a study on the effect of the dispersed phase on the lubricating and rheological properties of selected lubricant compositions. A vegetable oil base (rapeseed oil) was used to prepare vegetable lubricants, which were then thickened with lithium stearate, calcium stearate, aluminum stearate, amorphous silica, and montmorillonite. Based on the results of the tribological tests of selected lubricating compositions, it was found that calcium stearate and montmorillonite have the most beneficial effect on the anti-wear properties of the tested lubricating greases, while silica thickeners (amorphous silica and montmorillonite) provide the effective anti-wear protection in compared to the lubricants produced on lithium and aluminum stearate.

View Article and Find Full Text PDF

Corrosion Induced on Aluminum by Biodiesel Components in Non-Oxygen Environments.

Materials (Basel)

April 2024

Tecnológico Nacional de México/Instituto Tecnológico de Zacatepec, Departamento de Ingeniería Química y Bioquímica, Calzada Tecnológico 27, Zacatepec de Hidalgo 62780, Morelos, Mexico.

Biodiesel is a mixture of saturated and unsaturated Fatty Acid Methyl Esters (FAMEs) whose composition affects the corrosion behavior of metal containers during storage. This study examines the effect of the C=C bond present in selected FAMEs (Methyl Stearate, Methyl Oleate, and Methyl Linoleate) in aluminum corrosion in the absence of oxygen. First, mass loss assays were carried out at 100, 200, and 280 °C for 1000 h using pure Methyl Stearate (MS), 5% Methyl Oleate in Methyl Stearate (MS-5% MO), and 5% Methyl Linoleate in Methyl Stearate (MS-5% ML).

View Article and Find Full Text PDF

The production of autoclaved aerated concrete via the autoclaving process incurs substantial energy consumption, posing a challenge to sustainable economic development. Herein, a novel nonautoclaved aerated concrete (NAAC) was prepared using sulfoaluminate cement as the primary raw material and aluminum powder as the aerating agent. The physicomechanical characteristics and pore structures of the sulfoaluminate-cement-based (SAC) NAAC (SAC-NAAC) were examined through X-ray diffraction, thermogravimetry, and scanning electron microscopy.

View Article and Find Full Text PDF

Modification of Polyamide 66 for a Media-Tight Hybrid Composite with Aluminum.

Polymers (Basel)

April 2023

Institute of Material Engineering, Polymer Engineering, University of Kassel, 34125 Kassel, Germany.

Metal-plastic composites are becoming increasingly important in lightweight construction. As a combination, e.g.

View Article and Find Full Text PDF

Sedimentation Stability of Magnetorheological Fluids: The State of the Art and Challenging Issues.

Micromachines (Basel)

November 2022

Department of Mechanical Engineering, The State University of New York, Korea (SUNY Korea), 119 Songdo Moonhwa-Ro, Yeonsu-Gu, Incheon 21985, Korea.

Among the many factors causing particle sedimentation, three principal ingredients are heavily involved: magnetic particles, a carrier liquid (base oil), and additives (surfactant). Therefore, many works have been carried out to improve the sedimentation stability of magnetorheological fluids (MRFs) by adopting the three methods. In the particle modification stage, the weight concentration, size distribution, particle shape, coated materials, and combinations of different sizes of the particles have been proposed, while for the modification of the carrier liquid, several works on the density increment, wettability control, and the use of natural oils, lubricant oil, grease, and ethyl- and butyl-acetate oils have been undertaken.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!