The advantage of using lead zirconate titanate (PbZr(0.54)Ti(0.46)O(3)) ceramics as an active material in nanoelectromechanical systems (NEMS) comes from its relatively high piezoelectric coefficients. However, its integration within a technological process is limited by the difficulty of structuring this material with submicrometer resolution at the wafer scale. In this work, we develop a specific patterning method based on optical lithography coupled with a dual-layer resist process. The main objective is to obtain sub-micrometer features by lifting off a 100-nm-thick PZT layer while preserving the material's piezoelectric properties. A subsequent result of the developed method is the ability to stack several layers with a lateral resolution of few tens of nanometers, which is mandatory for the fabrication of NEMS with integrated actuation and read-out capabilities.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1109/TUFFC.2012.2413 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Effect of the Current-Collecting Carbon Nanotubes Layer on the Properties of the Lead Zirconate Titanate Film for Vibration Sensors.
Sensors (Basel)
January 2025
Institute of Nanotechnologies, Electronics and Equipment Engineering, Southern Federal University, 347922 Taganrog, Russia.
One of the challenging problems in the research and development of vibration sensors relates to the formation of Ohmic contacts for the removal of an electrical signal. In some cases, it is proposed to use arrays of carbon nanotubes (CNTs), which can serve as highly elastic electrode materials for vibration sensors. The purpose of this work is to study the effect of a current-collecting layer of CNTs grown over silicon on the properties of a lead zirconate titanate (PZT) film, which is frequently employed in mechanical vibration sensors or energy harvesters.
View Article and Find Full Text PDFHighly Sensitive Non-Dispersive Infrared Gas Sensor with Innovative Application for Monitoring Carbon Dioxide Emissions from Lithium-Ion Battery Thermal Runaway.
Micromachines (Basel)
December 2024
Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China.
The safety of power batteries in the automotive industry is of paramount importance and cannot be emphasized enough. As lithium-ion battery technology continues to evolve, the energy density of these batteries increases, thereby amplifying the potential risks linked to battery failures. This study explores pivotal safety challenges within the electric vehicle sector, with a particular focus on thermal runaway and gas emissions originating from lithium-ion batteries.
View Article and Find Full Text PDFStudy on a Strategy to Improve the Image Quality and Imaging Depth for Novel Synthetic Aperture Schemes: An Experimental Investigation.
Ultrason Imaging
January 2025
Biomedical Ultrasound Imaging Laboratory, Department of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology, Madras, Chennai, India.
Imaging depth remains a restriction for Synthetic Aperture (SA) approaches, even though SA techniques have been shown to overcome some of the drawbacks of Conventional Focused Beamforming (CFB) technique. This limitation is attributed to lesser energy per transmit in SA techniques compared to that of CFB technique. Therefore, in this paper, a systematic investigation is done to evaluate the improvement in imaging depth and image quality of B-mode ultrasound images in the case of SA technique using PZT transducer by boosting the input voltage to the transducer, while measuring the acoustic exposure parameters recommended in international standards.
View Article and Find Full Text PDFAdvancement in piezoelectric nanogenerators for acoustic energy harvesting.
Microsyst Nanoeng
December 2024
Department of Computer and Information Engineering, Khalifa University, Abu Dhabi, 12778, UAE.
The demand for sustainable energy sources to power small electronics like IoT devices has led to exploring innovative solutions like acoustic energy harvesting using piezoelectric nanogenerators (PENGs). Acoustic energy harvesting leverages ambient noise, converting it into electrical energy through the piezoelectric effect, where certain materials generate an electric charge in response to mechanical stress or vibrations. This review paper provides a comprehensive analysis of the advancements in PENG technology, emphasizing their role in acoustic energy harvesting.
View Article and Find Full Text PDFPlasmonic electro-optic modulators on lead zirconate titanate platform.
Nanophotonics
August 2024
Center for Nano Optics, University of Southern Denmark, Odense, Denmark.
The advancement in material platforms exhibiting strong and robust electro-optic effects is crucial for further progress in developing highly efficient and miniaturized optoelectronic components with low power consumption for modern optical communication systems. In this work, we investigate thin-film lead zirconate titanate (PZT) substrates grown by a chemical solution deposition technique as a potential platform for on-chip plasmonic electro-optic modulators. A high modulation depth (>40 %) is achieved with 15 μm-long electro-optic directional coupler modulators.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!