The generation of an avalanche of runaway electrons is demonstrated for the first time in a laboratory experiment. Two flows of runaway electrons are formed sequentially in an extended air discharge gap at the stage of delay of a pulsed breakdown. The first, picosecond, runaway electron flow is emitted in the cathode region where the field is enhanced. Being accelerated in the gap, this beam generates electrons due to impact ionization. These secondary electrons form a delayed avalanche of runaway electrons if the field is strong enough. The properties of the avalanche correspond to the existing notions about the runaway breakdown in air. The measured current of the avalanche exceeds up to an order the current of the initiating electron beam.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1103/PhysRevLett.109.085002 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Photoelectric Feedback Mechanism for Acceleration of Runaway Electrons in Gas Discharges at High Overvoltages.
Phys Rev Lett
December 2024
Laboratory of Plasma Physics (LPP), CNRS, Sorbonne Université, École Polytechnique, Institut Polytechnique de Paris, Palaiseau, France.
Energy conservation dictates that an electron with elementary charge e traversing a vacuum gap formed by electrodes maintained at potential difference U volts acquires maximum energy of eU. In many experiments electrons with energies as high as 3eU have been observed. The experimental discovery of this effect was made over 50 years ago and is still a subject of significant controversy in applications related to x-ray generation from high voltage discharges.
View Article and Find Full Text PDFCalorimetry probe for runaway electron heat load measurement at COMPASS.
Rev Sci Instrum
November 2024
Institute of the Plasma Physics of the Czech Academy of Sciences, Prague 18200, Czech Republic.
Runaway electrons, accelerated in a tokamak discharge to high energies (tens of MeV), can cause serious damage to plasma facing components. Therefore, it is important to develop effective mitigation strategies to reduce the risk of tokamak damage. To study the effects of various mitigation strategies, a dedicated diagnostic, the calorimetry probe, was developed at the COMPASS tokamak.
View Article and Find Full Text PDFThe impact of tube voltage on the erosion of rotating x-ray anodes.
Med Phys
November 2024
Particle Physics, Astrophysics and Medical Imaging Department, KTH Royal Institute of Technology, Stockholm, Sweden.
Background: The permitted input power density of rotating anode x-ray sources is limited by the performance of available target materials. The commonly used simplified formulas for the focal spot surface temperature ignore the tube voltage despite its variation in clinical practice. Improved modeling of electron transport and target erosion, as proposed in this work, improves the prediction of x-ray output degradation by target erosion, the absolute x-ray dose output and the quality of diagnostic imaging and orthovolt cancer therapy for a wide range of technique factors.
View Article and Find Full Text PDFBinary Nature of Collisions Facilitates Runaway Electron Generation in Weakly Ionized Plasmas.
Phys Rev Lett
October 2024
Department of Nuclear Engineering, Seoul National University, Seoul, South Korea.
Dreicer generation is one of the main mechanisms of runaway electron generation in weakly ionized plasmas. It is often described as a diffusive flow from the Maxwellian core into high energies under the effect of the electric field. In this Letter we demonstrate a critical role of the binary nature of inelastic collisions in weakly ionized plasma during tokamak startup, where some electrons experience virtually no collisions during acceleration to the critical energy.
View Article and Find Full Text PDFProperties of Wedge Wire Bonded Connection Between a Composite Copper Core Aluminum Shell Wire and an 18650 Cylindrical Lithium-Ion Battery Cell.
Materials (Basel)
October 2024
Department of Joining Engineering, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, Narbutta 85, 02-524 Warsaw, Poland.
Wedge wire bonding is a solid-state joining process that uses ultrasonic vibrations in combination with compression of the materials to establish an electrical connection. In the battery industry, this process is used to interconnect cylindrical battery cells due to its ease of implementation, high flexibility and ease of automation. Wire materials typically used in battery pack manufacturing are pure or alloyed aluminum and copper.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!