[Electricity generation performance of two-chamber microbial full cell in the treatment of simulated wastewater].

The start-up procedures, the degradation efficiency of organics at the anode and the removal efficiency of Cu2+ at the cathode of the cell were studied, based on which the performance of MFC (microbial fuel cell) in electricity generation and wastewater treatment was evaluated. A simple two-chamber microbial fuel cell was established with simulated molasses wastewater as substrate at the anode and simulated electroplating wastewater as an electron acceptor at the cathode. The results from a batch of experiments showed that the highest voltage output of 417.00 mV was obtained at an external resistance of 800 Omega, and that the maximum power density of 44.17 mW x m(-2) was obtained with an internal resistance of 293 Omega based on the polarization curve. In addition, COD removal rate reached its highest value (47.31%) in the fifth cycle, and the maximum removal rate (59.76%) for Cu2+ was recorded in the fourth cycle. In summary, the application of MFC in the treatment of organic wastewater and electroplating wastewater is feasible.