Product ion spectra obtained with liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS) were applied to the identification of seized drug samples from atmospheric pressure matrix-assisted laser desorption/ionization product ion spectra (AP-MALDI-MS/MS spectra). Data acquisition was performed in the information-dependent acquisition (IDA) mode, and the substance identification was based on a spectral library previously created with LC-ESI/MS/MS using protonated molecules as precursor ions. A total of 39 seized drug samples were analyzed with both AP-MALDI and LC-ESI techniques using the same triple-quadrupole instrument (AB Sciex 4000QTRAP). The study shows that ESI-MS/MS spectra can be directly utilized in AP-MALDI-MS/MS measurements as the average fit and purity score percentages with AP-MALDI were 90% and 85%, respectively, being similar to or even better than those obtained with the reference LC/ESI-MS/MS method. This fact enables the possibility to use large ESI spectral libraries, not only to ESI analyses but also to analyses with other ionization techniques which produce protonated molecules as the base peak. The data obtained shows that spectral library search works also for analytical techniques which produce multi-component mass spectra, such as AP-MALDI, unless isobaric compounds are encountered. The spectral library search was successfully applied to rapid identification of confiscated drugs by AP-MALDI-IDA-MS/MS.

Download full-text PDF

Source
http://dx.doi.org/10.1002/dta.1419DOI Listing

Publication Analysis

Top Keywords

product ion
12
ion spectra
12
spectral library
12
atmospheric pressure
8
pressure matrix-assisted
8
matrix-assisted laser
8
laser desorption/ionization
8
mass spectrometry
8
seized drug
8
drug samples
8

Similar Publications

Microbial-induced Synthesis of nano NiFe LDH for High-efficiency Oxygen Evolution.

Chemistry

January 2025

Wuhan University of Technology - Mafangshan Campus: Wuhan University of Technology, School of Material Science and Engineeringl, CHINA.

NiFe layered double hydroxide (LDH) currently are the most efficient catalysts for the oxygen evolution reaction (OER) in alkaline environments. However, the development of high-performance low cost OER electrocatalysts using straightforward strategies remains a significant challenge. In this study, we describe an innovative microbial mineralization-based method for in situ-induced preparation of NiFe LDH nanosheets loaded on nickel foam and demonstrate that this material serves as an efficient oxygen evolution electrocatalyst.

View Article and Find Full Text PDF

Nanoscale Titanium Oxide Memristive Structures for Neuromorphic Applications: Atomic Force Anodization Techniques, Modeling, Chemical Composition, and Resistive Switching Properties.

Nanomaterials (Basel)

January 2025

Research Laboratory Neuroelectronics and Memristive Nanomaterials (NEUROMENA Lab), Institute of Nanotechnologies, Electronics and Electronic Equipment Engineering, Southern Federal University, Taganrog 347922, Russia.

This paper presents the results of a study on the formation of nanostructures of electrochemical titanium oxide for neuromorphic applications. Three anodization synthesis techniques were considered to allow the formation of structures with different sizes and productivity: nanodot, lateral, and imprint. The mathematical model allowed us to calculate the processes of oxygen ion transfer to the reaction zone; the growth of the nanostructure due to the oxidation of the titanium film; and the formation of TiO, TiO, and TiO oxides in the volume of the growing nanostructure and the redistribution of oxygen vacancies and conduction channel.

View Article and Find Full Text PDF

Lead (Pb) is a highly toxic heavy metal that causes significant health hazards and environmental damage. Thus, the detection and removal of Pb ions in freshwater sources are imperative for safeguarding public health and the environment. Moreover, the transformation of single resources into multiple high-value products is vital for achieving sustainable development goals (SDGs).

View Article and Find Full Text PDF

In this work, within the framework of a self-consistent model of arc discharge, a simulation of plasma parameters in a mixture of argon and methane was carried out, taking into account the evaporation of the electrode material in the case of a refractory and non-refractory cathode. It is shown that in the case of a refractory tungsten cathode, almost the same methane conversion rate is observed, leading to similar values in the density of the main methane conversion products (C, C, H) at different values of the discharge current density. However, with an increase in the current density, the evaporation rate of copper atoms from the anode increases, and a jump in the - characteristic is observed, caused by a change in the plasma-forming ion.

View Article and Find Full Text PDF

A Magnetic Photocatalytic Composite Derived from Waste Rice Noodle and Red Mud.

Nanomaterials (Basel)

December 2024

College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China.

This study is the first to convert two waste materials, waste rice noodles (WRN) and red mud (RM), into a low-cost, high-value magnetic photocatalytic composite. WRN was processed via a hydrothermal method to produce a solution containing carbon quantum dots (CQDs). Simultaneously, RM was dissolved in acid to form a Fe ion-rich solution, which was subsequently mixed with the CQDs solution and underwent hydrothermal treatment.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!