A novel, technically and economically benign procedure to combine vermiculite nanoplatelets with nanocellulose fibre dispersions into functional biohybrid films is presented. Nanocellulose fibres of 20 nm diameters and several micrometers in length are mixed with high aspect ratio exfoliated vermiculite nanoplatelets through high-pressure homogenization. The resulting hybrid films obtained after solvent evaporation are stiff (tensile modulus of 17.3 GPa), strong (strength up to 257 MPa), and transparent. Scanning electron microscopy (SEM) shows that the hybrid films consist of stratified nacre-like layers with a homogenous distribution of nanoplatelets within the nanocellulose matrix. The oxygen barrier properties of the biohybrid films outperform commercial packaging materials and pure nanocellulose films showing an oxygen permeability of 0.07 cm(3) μm m(-2) d(-1) kPa(-1) at 50% relative humidity. The oxygen permeability of the hybrid films can be tuned by adjusting the composition of the films. Furthermore, the water vapor barrier properties of the biohybrid films were also significantly improved by the addition of nanoclay. The unique combination of excellent oxygen barrier behavior and optical transparency suggests the potential of these biohybrid materials as an alternative in flexible packaging of oxygen sensitive devices such as thin-film transistors or organic light-emitting diode displays, gas storage applications and as barrier coatings/laminations in large volume packaging applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c2nr31726e | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Stimuli-Responsive Polymer Actuator for Soft Robotics.
Polymers (Basel)
September 2024
Department of Chemical and Biomolecular Engineering, Sogang University, 35 Baekbeom-ro, Mapo-gu, Seoul 04107, Republic of Korea.
Polymer actuators are promising, as they are widely used in various fields, such as sensors and soft robotics, for their unique properties, such as their ability to form high-quality films, sensitivity, and flexibility. In recent years, advances in structural and fabrication processes have significantly improved the reliability of polymer sensing-based actuators. Polymer actuators have attracted considerable attention for use in artificial or biohybrid systems, as they have the potential to operate under diverse conditions with high durability.
View Article and Find Full Text PDFUV laser-processed microstructure for building biohybrid actuators with anisotropic movement.
Biofabrication
February 2024
School of Life Science and Technology, Tokyo Institute of Technology, B-50, 4259 Nagatsuta-cho, Midori-ku, Yokohama 226-8501, Japan.
Article Synopsis
- The fabrication of biohybrid actuators mimics lifelike movements by aligning muscle cells in specific patterns, utilizing structures similar to natural muscle tissue.
- A UV laser-processed microstructure enables the creation of tailored microgrooves in poly(styrene-butadiene-styrene) films, ensuring precise alignment of skeletal myotubes.
- The actuators can contract through electrical stimulation and exhibit complex motions, such as twisting, thanks to the unique curved microgrooved design, highlighting the potential of this innovative microfabrication technique.
Organic-inorganic biohybrid films from wool-keratin/jellyfish-collagen/silica/boron via sol-gel reactions for soft tissue engineering applications.
Biomed Mater
February 2024
Regenerative Biomaterials Laboratory, Department of Bioengineering, Faculty of Engineering, Canakkale Onsekiz Mart University, Canakkale 17100, Turkey.
Therapeutic angiogenesis is pivotal in creating effective tissue-engineered constructs that deliver nutrients and oxygen to surrounding cells. Hence, biomaterials that promote angiogenesis can enhance the efficacy of various medical treatments, encompassing tissue engineering, wound healing, and drug delivery systems. Considering these, we propose a rapid method for producing composite silicon-boron-wool keratin/jellyfish collagen (Si-B-WK/JFC) inorganic-organic biohybrid films using sol-gel reactions.
View Article and Find Full Text PDFMetal-based porous hydrogels for highly conductive biomaterial scaffolds.
Oxf Open Mater Sci
February 2023
Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge, MA 02115, USA.
Multielectrode arrays are fabricated from thin films of highly conductive and ductile metals which cannot mimic the natural environment of biological tissues. These properties limit the conformability of the electrode to the underlying target tissue, and present challenges in developing seamless interfaces. By introducing porous, hydrogel materials that are embedded with metal additives, highly conductive hydrogels can be formed.
View Article and Find Full Text PDFInterfacing poly(-anisidine) with photosystem I for the fabrication of photoactive composite films.
Nanoscale Adv
January 2024
Department of Chemical and Biomolecular Engineering, Vanderbilt University Nashville Tennessee 37235-1604 USA
Photosystem I (PSI) is an intrinsically photoactive multi-subunit protein that is found in higher order photosynthetic organisms. PSI is a promising candidate for renewable biohybrid energy applications due to its abundance in nature and its high quantum yield. To utilize PSI's light-responsive properties and to overcome its innate electrically insulating nature, the protein can be paired with a biologically compatible conducting polymer that carries charge at appropriate energy levels, allowing excited PSI electrons to travel within a composite network upon light excitation.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!