The toxicity of high salinity tannery wastewater produced after an activated sludge secondary treatment on the germination and seedling growth of Trifolium pratense, a species used as indicator in toxicity tests, was evaluated. Growth was inhibited by wastewater concentrations >25% and undiluted effluent caused a complete germination inhibition. Constructed wetlands (CWs) with Arundo donax or Sarcocornia fruticosa were envisaged to further polish this wastewater. Selection of plant species to use in CWs for industrial wastewater treatment is an important issue, since for a successful establishment they have to tolerate the often harsh wastewater composition. For that, the effects of this wastewater on the growth of Arundo and Sarcocornia were assessed in pot assays. Plants were subject to different wastewater contents (0/50/100%), and both were resilient to the imposed conditions. Arundo had higher growth rates and biomass than Sarcocornia and may therefore be the preferred species for use in CWs treating tannery wastewater. CWs planted with the above mentioned plants significantly decreased the toxicity of the wastewater, as effluent from the CWs outlet stimulated the growth of Trifolium at concentrations <50%, and seed germination and growth even occurred in undiluted effluent.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1080/15226514.2011.619233 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Characterization and application of polysaccharides produced by Pseudomonas atacamensis M7D1 for chromium (III) removal from tannery effluent.
Int J Biol Macromol
January 2025
Biotechnology Group, Chemical Engineering Department, Tarbiat Modares University, Tehran, Iran; Modares Environmental Research Institute, Tarbiat Modares University, Tehran, Iran. Electronic address:
The wastewater from various industries contaminated with heavy metals poses significant environmental challenges. Biosorption has emerged as a widely used method for removing heavy metals from industrial wastewater. Pseudomonas atacamensis M7D1 is known to produce polysaccharides, but the potential of its polysaccharides as an adsorbent for heavy metal removal still needs to be explored.
View Article and Find Full Text PDFBiosorbent silver nanoparticles decorated coffee-ground waste composite for cleaning water and antimicrobial applications.
Environ Sci Pollut Res Int
January 2025
Department of Physics, Faculty of Science, King Abdulaziz University, 21589, Jeddah, Saudi Arabia.
A sustainable biosorbent, silver nanoparticles-decorated coffee-ground waste (CWAg), was synthesized through a simple in-situ reduction method. CWAg is extensively characterized via SEM-EDX, PZC, FTIR, XRD, HR-TEM, and XPS analyses. The biosorbent was tested to remove chromium (Cr(VI)) and methylene blue (MB) from wastewater, and its antibacterial properties was evaluated.
View Article and Find Full Text PDFApplication of zeolites for efficient tannery wastewater remediation.
Environ Sci Pollut Res Int
January 2025
Stazione Sperimentale Per L'industria Delle Pelli E Delle Materie Concianti S.R.L., 80143, Napoli, Italy.
Leather manufacturing is the process of converting raw animal hides or skins into finished leather. The complex industrial procedures result in a tanning effluent composed of chemical compounds with potentially hazardous impacts on humans and ecosystems. Among the traditional and efficient wastewater treatments, adsorption is an effective and well-known approach, able to manage a wide range of contaminants from wastewater.
View Article and Find Full Text PDFAdsorption of Cr(VI) Using Organoclay/Alginate Hydrogel Beads and Their Application to Tannery Effluent.
Gels
November 2024
Departamento de Ingeniería Química, Universidad Nacional de Colombia Sede Manizales, Campus La Nubia, km 9 vía al Aeropuerto, Manizales 170003, Colombia.
The tanning industry is among the most environmentally harmful activities globally due to the pollution of lakes and rivers from its effluents. Hexavalent chromium, a metal in tannery effluents, has adverse effects on human health and ecosystems, requiring the development of removal techniques. This study assessed the efficacy of organobentonite/alginate hydrogel beads in removing Cr(VI) from a fixed-bed adsorption column system.
View Article and Find Full Text PDFFabrication of PVA-PVC composite membrane for enhanced TDS removal from tannery effluent: sustainable water treatment approach.
Environ Sci Pollut Res Int
January 2025
Department of Chemical Engineering, Faculty of Engineering, Jazan University, 11451, Jazan, Saudi Arabia.
Article Synopsis
- The study focuses on the environmental challenges posed by tannery wastewater, particularly high total dissolved solids (TDS) and contaminants, and introduces a new composite membrane made from polyvinyl alcohol (PVA) and polyvinyl chloride (PVC) designed for effective TDS removal.
- The membrane, created using a solution casting technique with a crosslinking agent for improved stability, showed a remarkable TDS removal efficiency of 91.73% under optimal conditions, along with significant reductions in turbidity and other harmful pollutants.
- With strong mechanical properties and partial biodegradability, the PVA-PVC membrane is positioned as a promising, cost-effective solution for sustainable wastewater treatment in the leather industry.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!