This paper presents the prism-type holographic optical element (PT-HOE) design for a small-form-factor (SFF) optical pickup head (OPH). The surface of the PT-HOE was simulated by three steps of optimization and generated by binary optics. Its grating pattern was fabricated on the inclined plane of a microprism by using the standard photolithography and specific dicing procedures. The optical characteristics of the device were verified. Based on the virtual image method, the SFF-OPH with the device was assembled and realized.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/AO.51.005758 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A multi-directional backlight autostereoscopic display system with high resolution, low crosstalk, and motion parallax is developed in this paper. The proposed multi-directional backlight system is based on the Bragg mismatched reconstruction of volume holographic optical element (VHOE), and includes a set of light sources which are uniformly arrayed along one direction. Each light source produces its corresponding directional lighting to follow the human eye position detected by an eye tracker.
View Article and Find Full Text PDFPrism-type holographic optical element design and verification for the blue-light small-form-factor optical pickup head.
Appl Opt
August 2012
Department of Mechanical Engineering, National ChungHsing University, 250 Kuo-Kuang Rd., Taichung 402, Taiwan.
This paper presents the prism-type holographic optical element (PT-HOE) design for a small-form-factor (SFF) optical pickup head (OPH). The surface of the PT-HOE was simulated by three steps of optimization and generated by binary optics. Its grating pattern was fabricated on the inclined plane of a microprism by using the standard photolithography and specific dicing procedures.
View Article and Find Full Text PDFA holographic fingerprint sensor has been developed for a system that identifies a person by his or her fingerprints. The sensor uses a laser as its light source and consists of a light-conducting plate, which is a transparent glass plate with a plain grating-type hologram, and a focusing lens system just under the hologram. Since the sensor uses a plane-parallel plate, all the optical paths from each point of a fingerprint to the hologram are equal, and a bright fingerprint can be created without the trapezoidal distortion that is inherent in conventional prism-type sensors.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!