Purpose: The cementless Bicontact total hip arthroplasty (THA) system (AESCULAP AG, Tuttlingen, Germany) was introduced in 1986/1987 and has been in successful clinical use in an unaltered form up to today. Although good long-term results with the Bicontact stem have been published, it is questionable whether the implant provides the criteria for a state-of-the-art stem regarding proximal bone stock preservation. The purpose of the study was to monitor the periprosthetic bone mineral density (BMD) in a prospective two-year follow-up dual-energy X-ray absorptiometry (DEXA) study.
Methods: After power analysis, a consecutive series of 25 patients with unilateral Bicontact stem implantation was examined clinically and underwent DEXA examinations. Scans of seven regions of interest were taken preoperatively and at one week, six months, and one and two years.
Results: One patient required stem revision due to a deep infection. The Harris Hip Score increased significantly by 44 points. The most significant bone loss was observed in the calcar region (R7) in the first six months (-19.2 %). It recovered in the following 18 months to -8.5 %. The BMD in the greater trochanter dropped significantly after six months and remained stable at this level. BMD exceeded baseline values in distal regions and even more in the lesser trochanter region after two years.
Conclusions: We conclude that the Bicontact stem provides adequate proximal bone stock preservation. We observed some signs of stress shielding at the tip of the stem, which is inevitable to some degree in THA with cementless straight stems. However, in this prospective DEXA investigation, we showed that proximal off-loading does not occur after THA with the Bicontact system. Thus, we believe that this stem is still a state-of-the-art implant.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3479282 | PMC |
http://dx.doi.org/10.1007/s00264-012-1616-4 | DOI Listing |
Orthopadie (Heidelb)
January 2024
Labor für Biomechanik und Implantatforschung, Orthopädische Universitätsklinik Heidelberg, Heidelberg, Deutschland.
Background: In this article, an overview and comparison of the most commonly used cemented hip stems, grouped into different stem types and cement mantle thickness, is given to see which combination performs well.
Methodology: Revision rates of cemented stem types were categorized from the Endoprosthesis Register-Germany, and 3‑ and 5‑year revision rates were reported and analyzed. For the research, the focus was on the Exeter, C‑Stem, MS-30, Excia, Bicontact, Charnley, Müller straight stem, Twinsys, Corail, Avenir, Quadra, and the Lubinus SP II stems.
Arch Orthop Trauma Surg
December 2022
Department of Orthopedic Surgery, Hyogo College of Medicine, 1-1, Mukogawa-cho, Nishinomiya, Hyogo, 663-8501, Japan.
Purpose: The purpose of the present study was to investigate the results of total hip arthroplasty (THA) using the Bicontact D stem with a minimum 10 year follow-up that focused on patients with developmental dysplasia of the hip (DDH).
Methods: One hundred five patients with osteoarthritis due to DDH who underwent primary THA were included in this study. The mean final follow-up period was 12.
Objective: The aim of study was to evaluate periprosthetic bone mineral density (BMD) changes of proximal femur, osseointegration and clinical outcomes after implantation of short-stemmed and conventional straight-stemmed prostheses.
Methods: This prospective, randomized study included 50 patients with unilateral total hip replacement. The patients were randomized into 2 cohorts: patients with a cementless short stem Metha (n=25) and patients with a cementless conventional straight stem Bicontact evaluated as the control (n=25).
Sci Rep
April 2021
Department of Osteology and Biomechanics, University Medical Center Hamburg-Eppendorf, Lottestr. 55a, 22529, Hamburg, Germany.
Degradation at the modular head-neck interface in total hip arthroplasty (THA) is predominately expressed in the form of corrosion and fretting, potentially causing peri-prosthetic failure by adverse reactions to metal debris. This retrieval study aimed to quantify variations in stem taper surface topographies and to assess the influence on the formation of corrosion and/or fretting in titanium alloy stem tapers combined with metal and ceramic heads. Four hip stem designs (Alloclassic, CLS, Bicontact and SL-Plus) were characterized using high-resolution 3D microscopy, and corrosion and fretting were rated using the Goldberg scoring scheme.
View Article and Find Full Text PDFJ Rural Med
April 2021
Human Informatics and Interaction Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Japan.
In this study, thermoelastic stress analysis was conducted to clarify the surface stress distribution of a femur in which a BiCONTACT E stem was inserted. The contact sites between the stem and femur were examined to investigate the association with the range of stress distribution. BiCONTACT E was set up using two synthetic femurs that mimic the morphology and mechanical properties of living bone.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!