Current tissue engineering technologies involve the seeding of cells on porous scaffolds, within which the cells can proliferate and differentiate, when cultured in bioreactors. The flow of culture media through the scaffolds generates stresses that are important for both cell differentiation and cell growth. A recent study [Appl. Phys. Lett. 97 (2010), 024101] showed that flow-induced stresses inside highly porous and randomly structured scaffolds follow a three-point gamma probability density function (p.d.f.). The goal of the present study is to further investigate whether the same p.d.f. can also describe the distribution of stresses in structured porous scaffolds, what is the range of scaffold porosity for which the distribution is valid, and what is the physical reason for such behavior. To do that, the p.d.f. of flow-induced stresses in different scaffold geometries were calculated via flow dynamics simulations. It was found that the direction of flow relative to the internal architecture of the scaffolds is important for stress distributions. The stress distributions follow a common distribution within statistically acceptable accuracy, when the flow direction does not coincide with the direction of internal structural elements of the scaffold.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.3233/BIR-2012-0613 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fabrication and characterization of silver nanowire-coated porous alginate wet-laid webs for wound dressing applications.
Int J Biol Macromol
January 2025
Faculty of Textile Technologies and Design, Istanbul Technical University, Istanbul, Turkey. Electronic address:
Wound care presents an imposed financial burden for healthcare organizations, prompting the need for novel and cost-efficient dressings. In this study, we address this challenge by introducing a novel approach to fabricate antibacterial alginate-based fibrous materials using a combination of wet spinning and the wet-laying method, which offer advantages including structural and functional properties such as breathability, nontoxicity, biocompatibility, and cost-effectiveness. The wet spinning method was employed to develop porous and non-porous Ca-alginate fibers with diameters of 100 ± 4.
View Article and Find Full Text PDFMimicking osteoid 3D porous dense microfiber silk fibroin embedded poly(vinyl alcohol) scaffold for alveolar ridge preservation.
Regen Biomater
November 2024
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Prince of Songkla University, Hatyai 90110, Thailand.
Alveolar ridge loss presents difficulties for implant placement and stability. To address this, alveolar ridge preservation (ARP) is required to maintain bone and avoid the need for ridge augmentation using socket grafting. In this study, a scaffold for ARP was created by fabricating a 3D porous dense microfiber silk fibroin (mSF) embedded in poly(vinyl alcohol) (PVA), which mimics the osteoid template.
View Article and Find Full Text PDFElectrospinning based biomaterials for biomimetic fabrication, bioactive protein delivery and wound regenerative repair.
Regen Biomater
December 2024
Department of Trauma Surgery, Orthopaedic Surgery and Plastic Surgery, University Medical Center Göttingen, University of Göttingen, Göttingen 37075, Germany.
Electrospinning is a remarkably straightforward and adaptable technique that can be employed to process an array of synthetic and natural materials, resulting in the production of nanoscale fibers. It has emerged as a novel technique for biomedical applications and has gained increasing popularity in the research community in recent times. In the context of tissue repair and tissue engineering, there is a growing tendency toward the integration of biomimetic scaffolds and bioactive macromolecules, particularly proteins and growth factors.
View Article and Find Full Text PDFQualitative Research of Composite Graphene Membranes Using the Electric Mode in SEM and AFM.
Materials (Basel)
January 2025
Faculty of Mechanical Engineering, Institute of Materials Science and Engineering, Lodz University of Technology, 1/15 Stefanowskiego St., 90-924 Lodz, Poland.
The development of new graphene-based materials necessitates the application of suitable material imaging techniques, especially for the identification of defects in the graphene structure and its continuity. For this purpose, it is natural to use one of the main properties of graphene-electrical conductivity. In this work, we prepare a 9 cm large-area monolayer graphene membrane on porous scaffolding sealed with either GO or rGO.
View Article and Find Full Text PDFRapid Fabrication of Polyvinyl Alcohol Hydrogel Foams With Encapsulated Mesenchymal Stem Cells for Chronic Wound Treatment.
J Biomed Mater Res A
January 2025
Biomedical and Chemical Engineering and BioInspired Syracuse: Institute for Material and Living Systems, Syracuse University, Syracuse, New York, USA.
Chronic wounds present a major healthcare challenge around the world, and significant hurdles remain in their effective treatment due to limitations in accessible treatment options. Mesenchymal stem cells (MSCs) with multifunctional differentiation and modulatory properties have been delivered to chronic wounds to enhance closure but have limited engraftment when delivered without a scaffold. In this study, hybrid porous hydrogel foams composed of modified polyvinyl alcohol and gelatin were developed that are suitable for rapid and facile MSC encapsulation, fully degradable, and supportive of wound healing.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!