The polyhedral CoS(2) with a narrow size distribution was synthesized by a facile solid-state assembly process in a sealed silica tube. The flux of potassium halide (KX; X = Cl, Br, I) plays a crucial role in the formation of polyhedrons and the size distribution. The S(2)(2-) groups in CoS(2) can be controllably withdrawn during heat treatment in air. The obtained phases and microstructures of CoS(2), Co(3)S(4), CoS, Co(9)S(8), and CoO depended on heating temperature and time. These cobalt materials, successfully used as the electrodes of lithium ion batteries, possessed good cycling stability in lithium ion batteries. The discharge capacities of 929.1 and 835.2 mAh g(-1) were obtained for CoS(2) and CoS respectively, and 76% and 71% of the capacities remained after 10 cycles. High capacities and good cycle performance make them promising candidates for lithium ion batteries. The approach combining solid-state assembly and heat treatment provides a simple and versatile way to prepare various metal chalcogeides for energy storage applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/am300951f | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
High selectivity, capacity and stability for electrochemical lithium extraction on boron-doped HMnO by tailoring lattice constant and intercalation energy.
Water Res
January 2025
State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, PR China; College of Environment and Resources, Xiangtan University, Xiangtan, Hunan 411105, PR China. Electronic address:
A sustainable supply of lithium from salt-lake brines is necessary due to the surge in demand of the lithium-battery market. However, the presence of coexisting ions, particularly Na, poses a significant challenge due to the similarities in charge, electronic structure, and hydrated size. The electrochemical system with manganese (Mn)-based lithium-ion (Li) sieves electrodes is a promising method for Li recovery, but often suffers from geometric configuration distortion, which reduces their selectivity and capacity.
View Article and Find Full Text PDFActivated Graphite with Richly Oxygenated Surface from Spent Lithium-Ion Batteries for Microwave Absorption.
Small
January 2025
School of Materials and Physics & Center of Mineral Resource Waste Recycling, China University of Mining and Technology, Xuzhou, Jiangsu, 221116, China.
Designing spent graphite anodes from lithium-ion batteries (LIBs) for applications beyond regenerated batteries offers significant potential for promoting the recycling of spent LIBs. The battery-grade graphite, characterized by a highly graphitized structure, demonstrates excellent conductive loss capabilities, making it suitable for microwave absorption. During the Li-ion intercalation and deintercalation processes in battery operation, the surface layer of spent graphite (SG) becomes activated, forming oxygen-rich functional groups that enhance the polarization loss mechanism.
View Article and Find Full Text PDFWhisker-free lithium electrodeposition by tuning electrode microstructure.
Phys Chem Chem Phys
January 2025
N.N. Semenov Federal Research Center for Chemical Physics, Kosygina str 4, Moscow 119991, Russia.
Growth of lithium whiskers or dendrites is the major obstacle towards safe and stable utilization of lithium metal anodes in rechargeable batteries. In this study, we look deeper into the mechanism of lithium electrodeposition. We find that before lithium whisker or dendrite nucleation occurs, lithium is deposited into the grain boundaries of the metal electrode, which we directly observed in the focused ion beam cross-sections of the lithium electrode.
View Article and Find Full Text PDFEffect of the Electrolyte on the Oxygen Reduction Reaction with PCN-224(Co).
ChemSusChem
January 2025
Leiden University: Universiteit Leiden, Leiden Institute of Chemistry, Einsteinweg 55, Room number EE4.19, 2333 CC, Leiden, NETHERLANDS, KINGDOM OF THE.
Electrocatalysis in metal-organic frameworks is an interplay between the diffusion of charges, the intrinsic catalytic rate, and the mass-transport of reactants through the pores. Here a systematic study is carried out to investigate the role of the electrolyte nature and concentration on the oxygen reduction reaction (ORR) with the PCN-224(Co) MOF in aqueous electrolyte. It was found that the ORR activity is slightly influenced by the nature of the ions in solution, providing that the ionic strength is high enough to minimize the resistivity during the measurement.
View Article and Find Full Text PDFEmerging Trends and Future Opportunities for Battery Recycling.
ACS Energy Lett
January 2025
George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States.
The global lithium-ion battery recycling capacity needs to increase by a factor of 50 in the next decade to meet the projected adoption of electric vehicles. During this expansion of recycling capacity, it is unclear which technologies are most appropriate to reduce costs and environmental impacts. Here, we describe the current and future recycling capacity situation and summarize methods for quantifying costs and environmental impacts of battery recycling methods with a focus on cathode active materials.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!